Green Car Congress

AUGUST 5, 2022

Using an inexpensive polymer called melamine, researchers from UC Berkeley, Texas A&M and Stanford have created a cheap, easy and energy-efficient way to capture carbon dioxide from smokestacks. The low cost of porous melamine means that the material could be deployed widely.

Low Cost 243

Low Cost Carbon Texas Cheap 243

Green Car Congress

MAY 31, 2023

A multi-institutional team led by the US Department of Energy’s (DOE) Argonne National Laboratory (ANL) has developed a low-cost cobalt-based catalyst for the production of hydrogen in a proton exchange membrane water electrolyzer (PEMWE). volts (Nafion 212 membrane) and low degradation in an accelerated stress test.

Low Cost 186

Low Cost Hydrogen Volt 2000 186

Green Car Congress

JULY 21, 2020

The projects will feature collaborations with EERE’s Advanced Manufacturing Office on manufacturing reliable and affordable electrolyzers and with EERE’s Vehicle Technologies Office on developing low-cost, high-strength carbon fiber for hydrogen storage tanks. Carbon Composite Optimization Reducing Tank Cost. Giner ELX Inc.

Carbon Fiber 321

Carbon Fiber Hydrogen Low Cost Polymer 321

Green Car Congress

MARCH 3, 2014

This is not, however, simply a case of reengineering the technology currently optimized for high-pressure conversion of syngas into methanol, because a low-pressure CO 2 reduction process may require a different catalyst. —Studt et al.

Low Cost 257

Low Cost Cleaning Clean Production 257

Green Car Congress

FEBRUARY 15, 2013

Lithium sulfur batteries are of great interest due to their high specific energy and relatively low cost (e.g., To overcome this mechanism, they introduced amphiphilic polymers to modify the carbon surface. The amphiphilic polymers provide anchoring points that allow lithium sulfides to bind strongly with the carbon surface.

Lithium Sulfur 334

Lithium Sulfur Batteries Battery Polymer 334

Green Car Congress

JUNE 15, 2015

Researchers led by a team from Griffith University in Australia have developed a multifunctional polymer binder that not only maintains the outstanding binding capabilities of sodium alginate but also enhances the mechanical integrity and lithium-ion diffusion coefficient in a LiFePO 4 (LFP) electrode during the operation of the batteries.

Li-ion 150

Li-ion Polymer Lithium Ion Sodium 150

Green Car Congress

FEBRUARY 18, 2020

The project concerns the production of hydrogen at scale from offshore floating wind in deep water locations. The concept consists of a large-scale floating wind turbine (nominally 10 MW) with an integrated water treatment unit and electrolyzers for localized hydrogen production. Contract value: £7.48 million (US$9.7

Hydrogen 386

Hydrogen Carbon Production Wind 386

Green Car Congress

FEBRUARY 14, 2011

The UK’s Carbon Trust has selected ACAL Energy, the developer of FlowCath low-platinum liquid cathode technology ( earlier post ), for a £1-million (US$1.6-million) million) investment as part of its Polymer Fuel Cell Challenge. However unlike conventional technology, the. The catholyte then flows back to the cell.

Polymer 199

Polymer Carbon Parts Fuel 199

Green Car Congress

MARCH 23, 2012

Grzegorz Milczarek from Poznan University of Technology (Poland), and Olle Inganäs from Linköping University (Sweden), have combined lignin derivatives, which are electronic insulators, with polypyrole, a conductive polymer, into an interpenetrating composite suitable for use as a battery cathode. —Milczarek and Inganäs. 1215159.

Polymer 268

Polymer Batteries Battery Renewable 268

Green Car Congress

DECEMBER 11, 2020

H2NEW includes National Renewable Energy Laboratory and Idaho National Laboratory as co-leads, and focuses on R&D to enable affordable, durable and efficient large-scale electrolyzers, which produce hydrogen from electricity and water (at both high and low temperatures). Efficient and innovative hydrogen production.

Hydrogen 321

Hydrogen Fuel Low Cost Idaho 321

Green Car Congress

JULY 7, 2015

The lead inventors of the technology are UCSB professor Dr. Alan Heeger, the recipient of a Nobel Prize in 2000 for the discovery and development of conductive polymers, and Dr. David Vonlanthen, a project scientist and expert in energy storage at UCSB. High energy, low cost. High energy, low cost, rapid charge.

Polymer 150

Polymer Li-ion Low Cost 2014 150

Green Car Congress

JANUARY 30, 2011

Example of micro fibers produced with 20 wt % AB (ammonia borane) in water as core solution, showing smooth (nonporous) and cylindrical (noncollapsed) fibers; from a 2010 paper by the scientific team. It also protects the hydrides from oxygen and water, making it possible to handle it in air. Credit: ACS, Kurban et al.

Hydrogen 262

Hydrogen Commercial Transportation Polymer 262

Green Car Congress

DECEMBER 2, 2018

a developer of low-cost, high-performance polymers for electrochemical applications, announced its selection by the US Department of Energy’s Advanced Research Projects Agency-Energy (ARPA-E) for an award that will support the continued development of its alkaline exchange ionomers and membranes. 3) Perfluorinated polymers (i.e.,

Fuel 261

Fuel Polymer New York Hydrogen 261

Green Car Congress

NOVEMBER 9, 2011

ITM Power reported that a recently completed three-year collaboration project co-funded by the UK Technology Strategy Board (TSB) resulted in a new alkaline solid polymer membrane for an electrolyzer. The alkaline environment enables alternative, lower cost non-precious metal catalyst materials to be used.

Hydrogen 218

Hydrogen Cost Of Powered Power 218

Green Car Congress

APRIL 1, 2011

Example of a lithium-water rechargeable battery. Researchers at the University of Texas, including Dr. John Goodenough, are proposing a strategy for high-capacity next-generation alkali (lithium or sodium)-ion batteries using water-soluble redox couples as the cathode. In theory, the decomposition potential of water is 4.27

Sodium 218

Sodium Li-ion Water Texas 218

Green Car Congress

OCTOBER 24, 2016

The Energy Department (DOE) recently announced $10 million, subject to appropriations, to support the launch of the HydroGEN Advanced Water Splitting Materials Consortium ( HydroGEN ). Currently, the Office of Energy Efficiency and Renewable Energy (EERE) funds research and development of low-carbon hydrogen production pathways.

Water 150

Water Hydrogen Production Green 150

Green Car Congress

JULY 11, 2012

Hydrogen storage start-up Cella Energy’s US subsidiary has signed a contract with NASA Kennedy Space Center (KSC) for the further research, development and potential production of its micro-bead, polymer-encapsulated chemical hydride technology. It also protects the hydrides from oxygen and water—making it possible to handle in air.

Hydrogen 231

Hydrogen Polymer Energy Low Cost 231

Green Car Congress

SEPTEMBER 2, 2021

HFTO’s Hydrogen Technologies Program is looking for a Hydrogen Shot Fellow to focus on clean hydrogen production and infrastructure research and development, including electrolysis and water splitting technologies.

Hydrogen 321

Hydrogen Energy Storage Clean Cleaning 321

Green Car Congress

JUNE 26, 2020

The IDEALFUEL project aims to create sustainable alternatives by developing new efficient and low-cost methods to produce low-sulfur heavy fuel oils from wood-based non-food biomass. Although cleaner fuels are available, many companies opt for HFOs due to their low cost.

Mariner 273

Mariner Oil Fuel Cleaner 273

Green Car Congress

SEPTEMBER 30, 2012

The report is specifically focused on the potential for technology from select UK companies to enable a disruptive step-change in fuel cell cost reduction to accelerate consumer uptake, leading to approximately double the number of fuel cell cars on the road globally by 2030 versus current expectations. 500,000 units per year).

Carbon 236

Carbon Fuel Market Polymer 236

Green Car Congress

SEPTEMBER 17, 2012

The Precourt Institute for Energy, the umbrella organization for energy research and education at Stanford, will fund the following four studies: Nanostructured Polymers for High-Performance Batteries. This project explores the use of specially designed nanostructured polymers to make high-energy, low-cost, flexible and stretchable batteries.

Energy 239

Energy Vehicles Powered Power 239

Green Car Congress

JUNE 23, 2015

Researchers at Stanford University have developed a new low-voltage, single-catalyst water splitter that continuously generates hydrogen and oxygen. In the reported study, the new catalyst achieved 10 mA cm −2 water-splitting current at only 1.51 V V to reach 10 mA cm −2 current (for integrated solar water splitting).

Water 150

Water Hydrogen Production Li-ion 150

Green Car Congress

JUNE 4, 2013

Schematic illustration of 3D porous SiNP/conductive polymer hydrogel composite electrodes. Each SiNP is encapsulated in a conductive polymer surface. A team at Stanford University has developed stable silicon Li-ion battery anodes by incorporating a conducting polymer hydrogel into the Si-based material. Click to enlarge.

Li-ion 236

Li-ion Manufacturer Polymer Deep Cycle 236

Green Car Congress

NOVEMBER 16, 2018

Ecolectro is developing alkaline exchange ionomers (AEIs) to enable low-cost fuel cell and electrolyzer technologies. Novel Polymer-enhanced Rechargeable Aluminum-Alkaline Battery Technology – $2,000,000. Stable Diacid Coordinated Quaternary Ammonium Polymers for 80-230 °C Fuel Cells – $2,900,000. Ionic Materials, Inc.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

JUNE 28, 2012

The consortium for the three year program includes, UK-based ITM Power; Consiglio Nazionale delle Ricerche (CNR-ITAE), the coordinator; European Commission, Directorate-General; Joint Research Centre, Institute for Energy and Transport (JRC); Centre National de la Recherche Scientifique (CNRS); Solvay Speciality Polymers Italy; and TRE S.p.A

Grant 218

Grant Supplies Italy Polymer 218

Green Car Congress

SEPTEMBER 18, 2012

This newly acquired SGI technology includes methods for highly parallelized, low-cost oligonucleotide synthesis and retrieval of sequence-validated DNA. All related know-how, equipment and technical support for implementation, were also purchased. Craig Venter, Ph.D., Founder and CEO, SGI. SGVI), a company co-founded with the J.

Purchase 218

Purchase 2005 Polymer Water 218

Green Car Congress

AUGUST 14, 2018

United Technologies Research Center: High Performance Non-PGM Transition Metal Oxide Oxygen Reduction Catalysts for Polymer Electrolyte Membrane Fuel Cells. Electrolyzer Integrated Modular Nano-Array Monolithic Catalytic Reactors for Low Pressure/Temperature and High Flux Synthetic Fuel Production. 1,997,216. .: Giner, ELX Inc.:

Hydrogen 186

Hydrogen Fuel Universal Polymer 186

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Advanced Water Splitting Materials. Precursor Development for Low-Cost, High-Strength Carbon Fiber. Giner, Inc. DOE share (FY17).

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

MAY 15, 2015

The projects are funded through ARPA-E’s two newest programs, Advanced Research In Dry cooling (ARID) and Accelerating Low-cost Plasma Heating and Assembly (ALPHA), which both seek to develop low-cost technology solutions. These projects have been selected for negotiation of awards; final award amounts may vary.

Fusion 150

Fusion Powered Power Low Cost 150

Green Car Congress

OCTOBER 4, 2011

The project was supported by the Carbon Trust as part of the Polymer Fuel Cells Challenge. Increasing power density is a critical factor in reducing the cost of fuel cells. An important challenge facing fuel cell membrane materials is the ability to maintain adequate water content for effective ionic conduction.

Powered 210

Powered Power Fuel Polymer 210

Green Car Congress

AUGUST 27, 2011

The process was able to convert aqueous carbohydrate streams derived from maple wood (produced using both hot water and acid hydrolysis) into gasoline-range products with carbon yields of up to 57% and an estimated octane number of 96.5. The team observed no significant catalyst deactivation, indicating that the catalysts are very stable.

Gasoline 257

Gasoline Renewable Production Water 257

Green Car Congress

OCTOBER 26, 2009

Water (1 project). Eagle Picher, in partnership with the Pacific Northwest National Laboratory, will develop a new generation of high energy, low cost planar liquid sodium beta batteries for grid scale electrical power storage applications. Low Cost, High Energy and Power Density, Nanotube-Enhanced Ultracapacitors.

Energy 231

Energy Grant Low Cost Li-ion 231

Green Car Congress

MAY 19, 2018

AvCarb Material Solutions, LLC: Development of Innovative Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells. Proton exchange membrane fuel cells provide clean energy for applications such as automotive, backup and portable power, but many technical and cost challenges limit their adoption. Techverse, Inc.:

Hydrogen 199

Hydrogen Fuel Low Cost Polymer 199

Green Car Congress

MARCH 10, 2018

Water flow through the membranes was 1000 times higher than predicted by Hagen-Poiseuille flow, in agreement with previous CNT membrane studies. A) SEM image of the CNT membrane surface, showing CNT tips emerging from the polymer. The CNTs used in the membranes were arc discharge nanotubes with inner diameters of 0.67 McGinnis et al.

Carbon 199

Carbon Fuel Polymer Austin 199

Green Car Congress

OCTOBER 29, 2014

The purpose of the workshop was to share information and identify the RD&D needs to enable low-cost, effective delivery of hydrogen from centralized production facilities to the point of use (e.g., retail, light-duty vehicle stations and other applications). kg for forecourt (1,500 kg/day) and $2.00/kg

Hydrogen 218

Hydrogen Production Low Cost 2014 218

Green Car Congress

JULY 2, 2017

Department of Energy (DOE) grant to continue their research in developing low-cost, high-strength carbon fiber. The center’s Carbon Materials Technologies Group received the award for a project titled “Precursor Processing Development for Low Cost, High Strength Carbon Fiber for Composite Overwrapped Pressure Vessel Applications.”

Carbon Fiber 150

Carbon Fiber Kentucky Carbon Low Cost 150

Green Car Congress

SEPTEMBER 14, 2016

Solid ion conductors made of affordable, easily produced materials could replace today’s mostly liquid electrolytes and expensive fuel cell parts, helping create a next generation of batteries and fuel cells that are low-cost, durable, and more efficient. Novel Polymer Electrolyte for Solid State Lithium Metal Battery Technology.

Li-ion 150

Li-ion Polymer Batteries Battery 150