Green Car Congress

SEPTEMBER 16, 2016

The funds will be used to develop novel membranes and lithium-metal anodes for the next generation of high-energy-density, low-cost batteries. Those inactive materials are expensive and wasteful. The company has developed a microporous polymer membrane to replace incumbent separator materials. Click to enlarge.

Li-ion 150

Li-ion Lithium Ion Energy Polymer 150

Green Car Congress

JULY 17, 2020

AOI 02: Low Cost Electric Traction Drive Systems Using No Heavy Rare Earth Materials. Low Cost, High-Performance, Heavy Rare Earth-Free 3-In-1 Electric Drive Unit. Low-Cost Rare-Earth Free Electric Drivetrain Enabled by Novel Permanent Magnets, Inverter, Integrated Design and Advanced Thermal Management.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

MAY 16, 2016

Novomer is commercializing a proprietary catalyst system that transforms waste CO 2 into high performance, low-cost polymers for a variety of applications, including foam and plastic that are easily recyclable. These polymers contain up to 50% CO 2 by mass. Low Finished Polymer Cost.

Ford 150

Ford Polymer CO2 Vehicles 150

Green Car Congress

SEPTEMBER 28, 2015

By employing proprietary pretreatment and processing, researchers at Oak Ridge National Laboratory and Drexel University have produced flexible polymer carbon composite films from scrap tires for use as electrodes for supercapacitors. The first synthesized highly porous carbon (1625 m 2  g −1 ) using waste tires as the precursor.

Polymer 150

Polymer Waste Carbon Low Cost 150

Green Car Congress

JANUARY 13, 2021

This proposed project will significantly (1) reduce Si anode costs; (2) improve efficiency and reduce waste in production; (3) reduce engineering and cost risks; and (4) reduce EV battery costs and accelerate the move to clean transportation and renewable energy. 24M Technologies, Inc. Cambridge Electronics, Inc.

Li-ion 199

Li-ion Batteries Battery Polymer 199

Green Car Congress

APRIL 30, 2022

The consortium will showcase these systems at both Damon and Moment Energy’s new facilities in Vancouver BC, demonstrating manufacturing scale-up of components, assembly systems and targeting design for a near zero waste production operation. However, the cost of producing MEAs is high and the durability is often poor.

Canada 304

Canada Li-ion Emissions Vehicles 304

Green Car Congress

JANUARY 11, 2017

Liquid Light has developed proprietary process technology to make major chemicals from low-cost, globally-abundant carbon dioxide. This acquisition will enable the development of a powerful technology platform on the basis of CO 2 feedstock, meaning it turns waste into valuable products such as chemicals and plastics.

Light 150

Light Convert CO2 Polymer 150

Green Car Congress

FEBRUARY 12, 2018

These low density steels are expected to generate energy savings by bringing efficiencies in the steel manufacturing and lifetime savings by use of lightweight steel in automotive structural applications. Argonne National Laboratory. Colorado State University. Dana-Farber Cancer Institute. FeNix Magnetics, Inc. 2,089,647.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

AUGUST 18, 2020

The US Department of Energy’s (DOE’s) Reducing EMbodied-Energy and Decreasing Emissions (REMADE) Manufacturing Institute announced approximately $35 million to support research and development (R&D) that will enable US manufacturers to increase the recovery, recycling, reuse, and remanufacturing of plastics, metals, electronic waste, and fibers.

Manufacturer 207

Manufacturer Iowa Waste Plugin 207

Green Car Congress

MAY 10, 2018

Elemental sulfur, as one of promising cathode materials, can offer a theoretical capacity of 1672 mAh g -1 and high energy density of 2600 W h kg -1 at a low cost, when it is coupled with metallic Li anode.

Lithium Sulfur 186

Lithium Sulfur Batteries Battery Engine 186

Green Car Congress

MAY 15, 2015

The projects are funded through ARPA-E’s two newest programs, Advanced Research In Dry cooling (ARID) and Accelerating Low-cost Plasma Heating and Assembly (ALPHA), which both seek to develop low-cost technology solutions. These projects have been selected for negotiation of awards; final award amounts may vary.

Fusion 150

Fusion Powered Power Low Cost 150

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Select OPEN 2021 projects include: Synteris. Stanford University. The Ohio State University. University of Washington.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

AUGUST 19, 2023

plans to develop a novel membrane system from Osmoses’ proprietary polymer composition that can produce enriched oxygen from air for integration into modular gasification systems for low-cost hydrogen production. The team intends to demonstrate high-purity (greater than 98% by volume, preferably above 99.5%

Hydrogen 150

Hydrogen Clean Cleaning Gas-Electric 150

Green Car Congress

JUNE 18, 2012

Coates of Cornell University in the Academic Category for developing a new family of catalysts that can effectively and economically turn carbon dioxide and carbon monoxide into valuable polymers. Professor Tang discovered a new way to greatly streamline the process of manufacturing simvastatin, thereby reducing waste.

2012 236

2012 Green Los Angeles Memphis 236

Green Car Congress

DECEMBER 13, 2019

Low-cost electric traction drive systems using no heavy rare earth materials. The objective of this potential area of interest is to research, develop, and test a heavy rare earth mineral free advanced motor and inverter drive system that costs ? Energy-efficient mobility systems.

2020 186

2020 Vehicles Polymer Gasoline-Electric 186

Green Car Congress

JANUARY 30, 2011

The final product is either a fine micro-fibrous polymer mat that resembles white tissue paper, or polymer micro-beads with a diameter of ~ 0.5 - 5µm, with the hydride material entrained in ~50 - 200nm pores within the polymer.

Hydrogen 262

Hydrogen Commercial Transportation Polymer 262

Green Car Congress

JANUARY 27, 2023

The goal of the project is to continue to develop a circular carbon economy that replaces the petroleum-based chemicals in consumer products with algae-derived and biodegradable polymers. This project will demonstrate the conversion of gaseous carbon wood wastes (terpenes) to renewable Terpenes SAF blending components.

Production 225

Production Carbon Conversion Fuel 225

Green Car Congress

JANUARY 28, 2016

The method can be applied to other electrode materials, too, making energy-dense, low-cost battery materials a realistic possibility. There are huge challenges associated with using low-cost,micrometre-sized Si source materials. —Yi Cui. Here we introduce a method to encapsulate Si microparticles (∼1–3 µm).

Li-ion 150

Li-ion Lithium Ion Energy Batteries 150

Green Car Congress

MAY 19, 2014

Potential high-value products from isolated lignin include low-cost carbon fiber, engineering plastics and thermoplastic elastomers, polymeric foams and membranes, and a variety of fuels and chemicals—all currently sourced from petroleum. Ragauskas et al. courtesy of Oak Ridge National Laboratory.] Click to enlarge.

Production 225

Production Carbon Fiber Polymer Fuel 225

Green Car Congress

JUNE 19, 2013

Calysta Energy and NatureWorks have entered into an exclusive, multi-year collaboration to research and develop a practical production process for fermenting methane into lactic acid, the building block for Ingeo , lactide intermediates and polymers made from renewable materials.

Building 170

Building Energy Asia Waste 170

Green Car Congress

JULY 14, 2015

This has led to improved biofuel productivity, higher economic returns, minimal waste production, and a lower carbon footprint. carbon fixation), such that the energy of the excess photons is wasted through non-photosynthetic processes. When they cannot be utilized efficiently they are wasted, normally through venting or flaring.

EPA 150

EPA Green Polymer Water 150

Green Car Congress

MAY 4, 2018

This FOA addresses gaps in current research and development (R&D) which hinder better utilizing waste streams (e.g. Topic Area 4: Biofuels and Bioproducts from Wet Organic Waste Streams. Wet organic waste streams represent valuable potential feedstocks for the bioeconomy. scale operations.

Waste 170

Waste Renewable Conversion Carbon 170

Green Car Congress

JANUARY 18, 2014

competitive waste heat recovery technologies. based systems for waste?heat Further, lightweight materials projects are sought that emphasize a combination of unique materials and processes to enable weight reduction of greater than 30% at a cost of less than $2.25 per pound of weight saved, which could include very low?cost

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

AUGUST 23, 2011

As an example, the end-of-life directive in Europe compels automakers to minimize the waste created when a vehicle reaches the end of its useful life. High-performance Polymers (PA11, PA12, PA46, PPA, PPS, PEEK). The adoption rate of plastics will be low in structural parts, which require robust impact resistance properties.

2017 210

2017 Automobile Market Polymer 210

Green Car Congress

AUGUST 14, 2014

Development of Low-cost, High Strength Automotive Aluminum Sheet (Area of Interest 1). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance. Description. Alcoa, Inc. Ford Motor Company. Eaton Corp.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

SEPTEMBER 3, 2020

will demonstrate its low-cost ICE-31 solvent with enhanced stability technology on a flue gas slipstream at Los Medanos Energy Center, a commercially dispatched natural gas combined-cycle power plant in Pittsburg, CA. High-Performance, Hybrid Polymer Membrane for Carbon Dioxide Separation from Ambient Air. ION Clean Energy Inc.

Carbon 236

Carbon Coal Gas-Electric Gas 236

Green Car Congress

MAY 28, 2015

This quality control device will help to drive down the costs of fuel cells by reducing waste and improving the process efficiency of roll-to-roll manufacturing of polymer electrolyte membranes. High Loading Lithium-Ion Electrode Architecture for Low Cost Electric Vehicle Batteries Ballast Energy, Inc. 149,871.44.

Li-ion 150

Li-ion Battery Powered Engine Lithium Ion 150

Green Car Congress

NOVEMBER 16, 2015

The first hydrogen TTO is focused on durable, high activity electrocatalyst with low platinum content and low cost for polymer electrolyte membrane fuel cell applications. DOE plans to issue the full Funding Opportunity Announcement (FOA) on 30 November 2015.

Hydrogen 150

Hydrogen Engine Fuel Electric Vehicles 150

Green Car Congress

DECEMBER 17, 2016

REFUEL projects will convert low-cost renewable energy into a transportable chemical fuel and use these fuels for transportation applications, while reducing production costs and environmental impact. FuelCell Energy, Inc. Giner, Inc. High-Efficiency Ammonia Production from Water and Nitrogen (Category 1). The Giner, Inc.

Carbon 150

Carbon Fuel Energy Hydrogen 150

Green Car Congress

DECEMBER 22, 2010

Under the program, the grantees will be expected to conduct life cycle cost analyses for different manufacturing volumes to help gauge the near-term, low-volume market viability for these technologies, along with their long-term potential. MEA cost and durability should also be addressed. Topic 1: Balance-of-Plant Components.

Fuel 218

Fuel Hydrogen Low Cost Transportation 218

Green Car Congress

OCTOBER 26, 2009

Waste Heat Capture (2 projects). Eagle Picher, in partnership with the Pacific Northwest National Laboratory, will develop a new generation of high energy, low cost planar liquid sodium beta batteries for grid scale electrical power storage applications. Low Cost, High Energy and Power Density, Nanotube-Enhanced Ultracapacitors.

Energy 231

Energy Grant Low Cost Li-ion 231

Green Car Congress

JANUARY 21, 2016

Secretary Moniz also announced that two innovative projects at CALSTART and the National Association of Regional Councils will receive $3 million to develop systems that help companies combine their purchasing of advanced vehicles, components, and infrastructure to reduce incremental cost and achieve economies of scale.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

DECEMBER 4, 2010

Keasling notes that bulk chemicals such as solvents and polymer precursors currently are rarely produced from microorganisms, because they can be produced inexpensively from petroleum by chemical catalysis. agricultural and forest waste, dedicated energy crops, etc.) agricultural and forest waste, dedicated energy crops, etc.)

Engine 239

Engine Design Fuel Polymer 239

Green Car Congress

NOVEMBER 13, 2009

BTG stabilizes the biomass deconstruction products to prevent them from reacting further to yield undesirable compounds such as organic acids and insoluble furan-based polymers. The BTG process can utilize many types of lignocellulosic feedstocks such as wood, grass, agricultural waste, or other forms of solid waste.

Gasoline 170

Gasoline Convert Waste Conversion 170

Green Car Congress

MARCH 10, 2016

Despite the many desirable attributes of PEF, the plastics industry has yet to find a low-cost way to manufacture it at scale. Instead of using sugar from corn to make FDCA, the Stanford team has been experimenting with furfural, a compound made from agricultural waste that has been widely used for decades.

Molten Salt 150

Molten Salt Carbon CO2 Fuel 150

Green Car Congress

APRIL 30, 2010

The team anticipates at least a twofold productivity improvement over current levels and a cost that can be competitive with gasoline. The project also includes a proprietary process to convert waste biomass into carbon dioxide and hydrogen to feed the bioreactor, allowing butanol production from waste feedstocks.

Carbon 249

Carbon Li-ion Batteries Battery 249

Green Car Congress

MARCH 3, 2015

Design, Deployment, and Validation of Advanced, Low-cost Mobile Hydrogen Refuelers. Areas of emphasis could include, but are not limited to: Development of microbial strains or co-cultures with improved hydrogen yields; Reactor designs to improve hydrogen production yields or reduce costs (e.g.,

Hydrogen 150

Hydrogen Fuel Range Hybrid 150