Green Car Congress

JANUARY 19, 2023

million investment from the High-Performance Computing for Manufacturing (HPC4Mfg) program for six teams which will tap into the US National Laboratories’ high-performance computing (HPC) resources to help manufacturers streamline their processes, increase their productivity, and lower their carbon footprint.

Manufacturer 199

Manufacturer Ford Batteries Battery 199

Green Car Congress

JULY 18, 2023

America Makes and the American National Standards Institute (ANSI) announced the publication of the Standardization Roadmap for Additive Manufacturing, Version 3.0 , developed by the America Makes and ANSI Additive Manufacturing Standardization Collaborative (AMSC).

Standards 150

Standards America Manufacturer Ohio 150

Green Car Congress

MARCH 18, 2020

The US Department of Energy (DOE) announced up to $3 million for high-performance computing, modeling, and simulation projects to improve manufacturing processes. Industry partners must provide at least 20% of the funding for new projects. of the project funding. of the project funding. Concept papers are due on Tuesday, 21 April 2020.

Manufacturer 220

Manufacturer USA Universal United States 220

Green Car Congress

APRIL 29, 2021

million for projects that support the recovery, recycling, and reuse of material waste generated by the manufacturing sector. The US industrial sector is responsible for 28% of domestic carbon emissions and consumes roughly one-third of the country’s primary energy—much of which is used to make materials.

Manufacturer 186

Manufacturer Carbon Emissions Waste 186

Green Car Congress

DECEMBER 23, 2016

Iowa State University will bring its expertise in biorenewable technologies and pilot plant operations to the country’s 10th Manufacturing USA Institute. The recently announced advanced manufacturing institute is dedicated to improving the productivity and efficiency of chemical manufacturing. Earlier post.)

Iowa 150

Iowa USA Manufacturer St. Louis 150

Green Car Congress

JUNE 23, 2020

The projects will use high performance computing to address key technical challenges in US manufacturing and materials development. HPC4Manufacturing is funded by DOE’s Office of Energy Efficiency and Renewable Energy’s Advanced Manufacturing Office. DOE’s Office of Fossil Energy will fund the project selections in HPC4Materials.

Manufacturer 225

Manufacturer USA Energy Renewable 225

Baua Electric

NOVEMBER 5, 2024

The new ZTR will be the first electrified power product produced at Honda North Carolina Manufacturing (NCM) facility in Swepsonville, and will be assembled using both “using “domestic and globally sourced parts.” The post New Honda battery electric lawn mowers will be made in the USA appeared first on Bauaelectric EV News.

Honda 52

Honda USA Batteries Battery 52

Green Car Congress

JUNE 1, 2018

The US Department of Energy’s (DOE’s) Clean Energy Smart Manufacturing Innovation Institute ( CESMII ) will award nearly $10 million for ten projects to help advance its goals and enable US manufacturers to develop and implement innovations that will advance U.S. manufacturing competitiveness, sustainability, and innovation.

Manufacturer 191

Manufacturer Clean Cleaning Energy 191

Green Car Congress

AUGUST 11, 2023

Cummins and Chevron USA, a subsidiary of Chevron Corporation announced a memorandum of understanding to leverage complementary positioning in hydrogen, natural gas, and other lower carbon fuel value chains. This collaboration is intended to encourage commercial and industrial adoption in North America.

Chevron 284

Chevron Carbon Fuel Alternative Fuels 284

Cars That Think

JULY 29, 2022

Legislation aimed at increasing semiconductor manufacturing in the United States has finally passed both houses of Congress, following a multiyear journey that saw many mutations and delays. Harrison , acting managing director of IEEE-USA, who has been involved in the legislation since its beginnings more than two years ago.

Manufacturer 108

Manufacturer Tax Credit Congress United States 108

Green Car Congress

AUGUST 17, 2023

The US Department of Energy (DOE)’s Advanced Materials and Manufacturing Technologies Office (AMMTO) renewed funding for PowerAmerica , DOE’s first Clean Energy Manufacturing Innovation Institute.

Renewable 195

Renewable Powered Power Raleigh 195

Green Car Congress

SEPTEMBER 6, 2023

In addition to its Cypress battery cell technology Sakuu is continuing to make progress on its longer-term initiative known as Kavian, an additive manufacturing platform. This is our invitation to battery manufacturers everywhere to work with us on pushing boundaries and capturing previously unattainable benefits. Earlier post.)

Battery 195

Battery Batteries Congress Polymer 195

Green Car Congress

AUGUST 16, 2018

million for 13 industry projects under fifth round of selections for the High Performance Computing for Manufacturing (HPC4Mfg) Program for the HPC4Mfg Program, led by Lawrence Livermore National Laboratory (LLNL) and its partners Lawrence Berkeley National Laboratory (LBNL) and Oak Ridge National Laboratory (ORNL). Arconic Inc.

Manufacturer 170

Manufacturer Batteries Battery Ozone 170

Green Car Congress

AUGUST 18, 2020

The US Department of Energy’s (DOE’s) Reducing EMbodied-Energy and Decreasing Emissions (REMADE) Manufacturing Institute announced approximately $35 million to support research and development (R&D) that will enable US manufacturers to increase the recovery, recycling, reuse, and remanufacturing of plastics, metals, electronic waste, and fibers.

Manufacturer 207

Manufacturer Iowa Waste Plugin 207

Green Car Congress

FEBRUARY 10, 2017

Oerlikon is expanding its global additive manufacturing (AM) business with a state-of-the-art R&D and production facility for additively manufactured advanced components in the Charlotte metro area in North Carolina, USA. Additive manufacturing is becoming increasingly suitable for the series production of advanced components.

Charlotte 150

Charlotte Manufacturer Production North Carolina 150

Green Car Congress

OCTOBER 20, 2022

billion to 21 projects to expand domestic manufacturing of batteries for electric vehicles (EVs) and the electrical grid and for materials and components currently imported from other countries. This US-owned and operated manufacturing plant in northern Alabama will be the first of its size in North America. Earlier post.) Of that, $1.6

Parts 459

Parts Batteries Battery Lithium Ion 459

Green Car Congress

AUGUST 4, 2021

To help industrialize production of future generation batteries, Mercedes-Benz is intensifying its cooperation with its longstanding partner GROB-WERKE GmbH & Co. Mercedes-Benz is thus strengthening its battery production capacity and know-how in the field of innovative manufacturing technology.

Mercedes 243

Mercedes Production Batteries Battery 243

Green Car Congress

OCTOBER 18, 2016

Ube Industries, Ltd. Ube Industries and Mitsubishi Chemical will apply for approval from government authorities in China and other relevant countries. Ube Industries manufactures electrolyte (“Purelyte”) at the Sakai Factory located in Osaka Prefecture, Japan, and at a plant located in Zhangjiagang, Jiangsu Province, China.

Mitsubishi 150

Mitsubishi Li-ion China Industry 150

Green Car Congress

JULY 2, 2013

As part of the Tier 3 requirements, EPA proposes allowing vehicle manufacturers to request approval for an alternative certification fuel—such as a high-octane 30% ethanol by volume (E30) blend—for vehicles they might design or optimize for use on such a fuel. Earlier post.). Earlier post.)

EPA 236

EPA USA Concept Fuel 236

Green Car Congress

MARCH 10, 2022

Hino USA has been awarded a grant provided by the New Energy and Industrial Technology Development Organization (NEDO), a Japanese governmental agency, to promote new technology for energy and environmental sector, along with Hino Motors, Ltd.

Hydrogen 326

Hydrogen California Grant Toyota 326

Baua Electric

MAY 4, 2023

Wheel provider Admirable Industries Global on Thursday reported a first-quarter web lack of $4 million. The loss was once brought about through trade manufacturing ranges which can be nonetheless underneath pre-pandemic ranges, in addition to suffering Ecu aftermarkets, executives stated all the way through a choice Thursday with analysts.

Industry 52

Industry Industrial Corporation Price 52

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). In the USA, the demand is being driven by the Corporate Average Fuel Economy (CAFE) standards.

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

MAY 9, 2017

million for 13 projects designed to stimulate the use of high performance supercomputing in US manufacturing. GE Global Research will partner with ORNL to reduce process development time and accelerate process certification of additively manufactured parts in a project titled “Powder Spreading Process Maps for Metal Additive Manufacturing.”.

Manufacturer 170

Manufacturer Ford Sierra Waste 170

Green Car Congress

DECEMBER 2, 2021

AKASOL AG is introducing its third generation of battery systems manufactured in series production. The ultra-high energy battery system will be manufactured in the Gigafactory 1 in Darmstadt from 2023. This will be followed by a plant in Hazel Park, USA, in 2023, said Holger Dilchert, Head of Sales On-Highway at AKASOL.

Energy 418

Energy Battery Batteries Lithium Ion 418

Green Car Congress

JANUARY 30, 2021

Australia-based Lynas Rare Earths Limited entered into an agreement with the US Government to build a commercial Light Rare Earths separation plant in the United States, through a wholly owned subsidiary, Lynas USA LLC. The Texas plant will ensure the US has a secure domestic source of high quality separated Rare Earth materials.

Light 321

Light Building Texas North America 321

Get Electric Vehicle

JULY 18, 2023

In this article, we will explore the electric vehicle motor manufacturers in India and the details of the industry that is spearheading the transition to sustainable mobility. List of Electric Vehicle Motor Manufacturers in India Let’s look into the list of a few major electric vehicle motor manufacturers in India.

India 75

India Manufacturer Electric Vehicles Motors 75

Green Car Congress

DECEMBER 17, 2012

ArcelorMittal has inaugurated a new, energy recovery and reuse boiler that recycles waste gas generated through its blast furnace process (for ironmaking) and uses it to generate electricity to help power the ArcelorMittal Indiana Harbor steel manufacturing plant in East Chicago, Indiana—the largest steelmaking complex in North America.

Manufacturer 246

Manufacturer Gas Indiana Chicago 246

Green Car Congress

FEBRUARY 24, 2010

CleanFUEL USA, a leader in alternative fuel dispensing equipment and engine technology, is working with one of the largest distributors of propane, Ferrellgas Partners, L.P., The Department of Energy (DOE) awarded CleanFUEL USA $12.9 The Department of Energy (DOE) awarded CleanFUEL USA $12.9

USA 210

USA Fort Worth St. Louis San Antonio 210

CleanTechnica EVs

AUGUST 13, 2021

Much of industry is responding well to the biggest issue of this century, one we've jointly created over the past 300 years. But there is still much work to be done.

Industry 131

Industry Industrial Climate Climate Change 131

Green Car Congress

DECEMBER 4, 2019

China continues to be the leading country for e-mobility in terms of industry and market, according to the E-Mobility Index 2019 from fka GmbH and Roland Berger GmbH. China no longer shares the overall lead with the USA; rather it has now set itself apart, pushing the USA into second place. — E-Mobility Index 2019.

All-Electric 195

All-Electric China South Korea France 195

Green Car Congress

APRIL 2, 2022

Benchmark’s Daisy Jennings-Gray warned of the “the huge raw material disconnect” that has opened up between growing downstream demand for critical battery raw materials from the EV industry and the increasingly limited availability of those raw materials. Europe is set to have 15% of this capacity, China 68%, and the USA 12%.

Supplies 284

Supplies Europe Lithium Ion Auto 284

Green Car Congress

DECEMBER 14, 2019

The US Department of Energy (DOE) announced up to $3 million for projects that address barriers to modular chemical process intensification to enable development of breakthrough technologies that can boost energy productivity and energy efficiency in industries such as oil and gas, pulp and paper, and chemical manufacturing.

Waste 170

Waste USA Manufacturer Renewable 170

Green Car Congress

JANUARY 9, 2015

The new Institute for Advanced Composites Manufacturing Innovation (IACMI), announced today by President Obama, will focus on advanced fiber-reinforced polymer composites that combine strong fibers with tough plastics to yield materials that are lighter and stronger than steel. PolyOne Corporation; PPG Industries, Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

MARCH 19, 2021

The deployment of the pilot plant will be in Clayton Valley, Nevada, USA. As EVs depend on lithium-ion rechargeable batteries, sustainable and efficient lithium production has become an important topic for regions, industries, and technology companies, as well as battery and large automotive manufacturers.

Nevada 321

Nevada Energy Lithium Ion Carbon 321

Driivz

JULY 13, 2022

The technology powering the EV charging industry has evolved so much over the last few years. As EVs become a natural part of the transportation ecosystem, we are witnessing a shift toward the standardization of chargers and the introduction of new industry protocols for interoperability. EV Charging Industry Protocols and Standards.

Standards 52

Standards Industry Industrial Charging 52

Green Car Congress

MARCH 13, 2017

Advancements in these areas will increase productivity, decrease scrap and material costs, and enable adoption into the automotive industry. Optimization of the manufacturing process for composite components allows for new avenues in weight reduction, strength, and safety in the automotive industry. —Bryan G.

Carbon Fiber 150

Carbon Fiber Carbon USA Tennessee 150

Baua Electric

OCTOBER 29, 2024

Zeus Electric Chassis, a Minnesota-based electric truck chassis-cab manufacturer, has signed a dealer agreement, its first, with One Stop Truck & Equipment of Sacramento, California, to distribute Class 5 electric work trucks. The made-in-the-USA aluminum cab has design origins in fire truck construction methods.

Dealers 52

Dealers Minnesota Sacramento Charging 52