Remove Energy Storage Remove Sodium Remove Standards
article thumbnail

Argonne researchers find cathode material synthesis a key reason for performance degradation of sodium-ion batteries

Green Car Congress

One of the more promising candidates for batteries beyond the current standard of lithium-ion materials is the sodium-ion (Na-ion) battery. Na-ion is particularly attractive because of the greater abundance and lower cost of sodium compared with lithium. In addition, when cycled at high voltage (4.5

Sodium 433
article thumbnail

New high energy, highly stable cathode for sodium-ion batteries

Green Car Congress

Researchers in South Korea have developed a novel high-energy cathode material, Na 1.5 F 0.7 , for sodium-ion (Na-ion) batteries (NIBs). This new material provides an energy density of 600 Wh kg –1 , the highest value among Na-ion cathodes. Ragone plot for the new Na 1.5 cathode and other cathode materials for NIBs.

Sodium 292
article thumbnail

Chalmers team develops graphite-like anode for Na-ion batteries; Janus graphene

Green Car Congress

Researchers at Chalmers University of Technology, Sweden, have developed a nanometric graphite-like anode for sodium ion (Na + storage), formed by stacked graphene sheets functionalized only on one side, termed Janus graphene. The estimated sodium storage up to C 6.9 100 to 150 mA h g ? 100 to 150 mA h g ?1

Sodium 379
article thumbnail

Amorphous titanium dioxide nanotube anodes for sodium-ion batteries show ability to self-improve specific capacity

Green Car Congress

A team of researchers at the US Department of Energy’s Argonne National Laboratory has synthesized amorphous titanium dioxide nanotube (TiO 2 NT) electrodes directly grown on current collectors without binders and additives to use as an anode for sodium-ion batteries. Earlier post.).

Sodium 210
article thumbnail

Vanderbilt researchers find iron pyrite quantum dots boost performance of sodium-ion and Li-ion batteries

Green Car Congress

nm, average) of iron pyrite (FeS 2 ) nanoparticles are advantageous to sustain reversible conversion reactions in sodium ion and lithium ion batteries. FeS 2 is particularly attractive for energy storage technology due to its earth abundance, low toxicity, and low raw material cost. … nanometers in size.

Li-ion 150
article thumbnail

Energy storage: the key to a decarbonised future

Setec Powerr

We are transitioning from fossil fuels to renewable energy sources such as wind and solar, and the use of energy storage is becoming more widespread. And with the popularity of electric vehicles, the grid is under more and more pressure, so the demand for energy storage is growing. Battery storage.

article thumbnail

Argonne researchers advancing new class of selenium sulfide composite cathodes that could boost Li-ion energy density 5x

Green Car Congress

The researchers have focused on carbon-selenium sulfide composites as an alternative material to the conventional lithium transition metal oxide positive electrode material in standard Li-ion batteries. Discovery of new cathode materials with higher energy density is, thus, a key to realizing more efficient energy storage systems.

Li-ion 225