Green Car Congress

JULY 17, 2020

Funded through the US Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE), projects will conduct research in advanced batteries, electrification, and manufacturing in support of DOE’s Energy Storage Grand Challenge. Solid State Lithium Ion Batteries using Silicon Composite Anodes.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

JANUARY 13, 2021

This proposed project will significantly (1) reduce Si anode costs; (2) improve efficiency and reduce waste in production; (3) reduce engineering and cost risks; and (4) reduce EV battery costs and accelerate the move to clean transportation and renewable energy. 24M Technologies, Inc. Cambridge Electronics, Inc.

Li-ion 199

Li-ion Battery Batteries Lithium Ion 199

Green Car Congress

NOVEMBER 16, 2018

OPEN solicitations are an open call to scientists and engineers for transformational technologies across the entire scope of ARPA-E’s energy mission. The selected OPEN 2018 projects are in 21 states and fall into 9 technical categories, including transportation, electricity generation and delivery, and energy efficiency. .

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

MAY 2, 2017

Li-sulfur batteries are looked to as a likely next-generation higher energy density energy storage system due to the high theoretical capacity, low cost and high earth abundance of sulfur. A paper on their work is published in the ACS journal Nano Letters.

Li-ion 150

Li-ion Lithium Sulfur Polymer Energy Storage 150

Green Car Congress

AUGUST 21, 2014

The US Department of Energy (DOE) is awarding $17.6 million in 14 cooperative agreements with small businesses and institutions of higher education to develop and to deploy efficient and environmentally friendly highway transportation technologies that will help reduce petroleum use in the United States. Earlier post.). Technology.

Engine 231

Engine Carbon Fiber Fuel Battery 231

Green Car Congress

MARCH 23, 2012

Grzegorz Milczarek from Poznan University of Technology (Poland), and Olle Inganäs from Linköping University (Sweden), have combined lignin derivatives, which are electronic insulators, with polypyrole, a conductive polymer, into an interpenetrating composite suitable for use as a battery cathode. —Milczarek and Inganäs.

Polymer 268

Polymer Battery Batteries Renewable 268

Green Car Congress

SEPTEMBER 1, 2017

This would be the largest unit of its kind in Germany and the world’s largest PEM (Polymer Electrolyte Membrane) electrolyzer. Electrolysis using low-cost renewable electricity could be a key technology for CO 2 -free hydrogen production in the Shell Rheinland Refinery.

Hydrogen 150

Hydrogen Installation Power Powered 150

Green Car Congress

APRIL 18, 2018

This topic will leverage the Electrocatalysis Consortium (ElectroCat) to accelerate the development of catalysts made without platinum group metals for use in fuel cells for transportation. 2a) Integrated Energy Production and Hydrogen Fueling R&D. Renewable hydrogen transportation fuel pathway of interest. A/mg PGM at 0.1

Hydrogen 231

Hydrogen Fuel Polymer Concept 231

Green Car Congress

JUNE 28, 2012

Various materials, including carbon materials, transition-metal oxides, conducting polymers, and hybrid composites have been widely studied as electrodes for these devices, the team notes. Ragone plots (energy density vs power density): (1) MnO 2 /Mn/MnO 2 SNTAs and (2) MnO 2 NTAs. discharging rate, and excellent cycle stability.

Li-ion 281

Li-ion Polymer Energy Storage Hybrid 281

Green Car Congress

JUNE 4, 2013

Schematic illustration of 3D porous SiNP/conductive polymer hydrogel composite electrodes. Each SiNP is encapsulated in a conductive polymer surface. A team at Stanford University has developed stable silicon Li-ion battery anodes by incorporating a conducting polymer hydrogel into the Si-based material. Click to enlarge.

Li-ion 236

Li-ion Manufacturer Polymer Deep Cycle 236

Green Car Congress

NOVEMBER 12, 2009

HPL was spun out from Professor Graetzel’s laboratory at the EPFL (Ecole Polytechnique Federale de Lausanne, Switzerland) in 2003 and is focused on the development of nano-structured metal oxide energy storage materials and novel electrolytes for use in next generation lithium ion batteries. Capacity at 1C is 900 mAh.

Li-ion 199

Li-ion America Lithium Ion Polymer 199

Green Car Congress

MAY 1, 2018

Currently, liquid electrolyte still [dominates] the commercial LIB market since they are low cost, easy to prepare and [feature] high ionic conductivity. Al 2 O 3 is a commonly used filler in polymer electrolytes, with electrochemical stability and relatively high ionic conductivity. Nail-penetration tests showed that LiNi 0.6

Li-ion 199

Li-ion Hybrid Battery Batteries 199

Green Car Congress

OCTOBER 10, 2011

The California Energy Commission has awarded $1,585,490 to spur research on projects including a solid-state Li-ion battery system for grid-scale energy storage. Funds for the 13 projects come from the Public Interest Energy Research (PIER) program. This technology would increase efficiency and lower production costs.

Li-ion 186

Li-ion Grid Energy California 186

Green Car Congress

MAY 16, 2016

As often stated, Li-sulfur batteries are extremely attractive as high-capacity next-generation energy storage systems due to their high theoretical specific capacity (S: 1675 mAh g -1) and excellent theoretical energy density (2600 Wh kg -1 ), low cost, environment friendliness and abundance. 2016.05.024.

Carbon 150

Carbon Li-ion Lithium Sulfur Transportation 150

Green Car Congress

JUNE 6, 2014

DOE is inviting applications for novel cathode Platinum Group Metal (PGM)-free catalysts for the oxygen reaction and PGM-free cathode membrane electrode assemblies (MEAs) for low-temperature and high-temperature polymer electrolyte membrane fuel cells (PEMFCs) and phosphoric acid fuel cells (PAFCs). Hydrogen infrastructure (TRL 9-10).

Hydrogen 231

Hydrogen Fuel Polymer Renewable 231

Green Car Congress

JANUARY 18, 2014

The FOA will give equal consideration to all proposals submitted, including submissions that address the following Areas of Interest: Energy Storage R&D. As described in multiple DOE reports, the main barriers to widespread PEV commercialization are the cost; performance and life; and abuse tolerance of high?

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

APRIL 30, 2010

The US Department of Energy is awarding $106 million in funding for 37 research projects selected in the second round by the DOE’s Advanced Research Projects Agency-Energy (ARPA-E). The target liquid fuel is isooctane, which fits well into the existing transportation fuel system in the United States. Earlier post.). Description.

Carbon 249

Carbon Li-ion Battery Batteries 249

Green Car Congress

FEBRUARY 26, 2015

The projects selected have the potential significantly to lower the cost or improve the performance, durability, or efficiency of fuel cells or hydrogen fuel production. Center for Transportation and the Environment. Develop reversible fuel cells for energy storage applications based on alkaline exchange membrane technology.

Fuel 150

Fuel Hydrogen Virginia 2011 150

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber. 3,500,000. .

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

DECEMBER 9, 2014

Technical topics for this FOA—which span the range of DOE interests from fossil to nuclear to renewable and low-carbon energies—include two hydrogen- and fuel-cell-related topics: fuel cell-battery electric hybrid trucks and in-line quality control devices for polymer electrolyte membrane (PEM) fuel cells.

2015 218

2015 Hydrogen Fuel Battery 218

Green Car Congress

OCTOBER 12, 2017

The research was supported by the Advanced Research Projects Agency – Energy (ARPA-E) and reported in the journal Nature. Thermal energy is of greatest value—that is, has the highest available work or ‘exergy’—when it can be transported, stored and converted at the highest possible temperatures.

Energy Storage 170

Energy Storage Hydrogen Energy Georgia 170

Green Car Congress

FEBRUARY 15, 2022

These new GaN power devices will enable the next generation of low-cost, fast, small, and reliable power electronics, which are key for efficient power conversion in data centers, solar farms, power grids, and electric vehicles. Stanford University. (PCI) The Ohio State University.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

SEPTEMBER 14, 2016

By creating high performance parts built with solid ion conductors—solids in which ions can be mobile and store energy—the IONICS program will focus on new ways to process and integrate these parts into devices with the goal of accelerating their commercial deployment. —ARPA-E Director Dr. Ellen D. Ionic Materials.

Li-ion 150

Li-ion Polymer Battery Batteries 150

Green Car Congress

MAY 15, 2015

The Energy Department’s Advanced Research Projects Agency-Energy (ARPA-E) will award $60 million in funding to 23 new projects aimed at creating highly efficient and scalable dry-cooling technologies for thermoelectric power plants and developing prototype technologies to explore new pathways for fusion power. SRI International.

Fusion 150

Fusion Power Powered Low Cost 150

Green Car Congress

JUNE 19, 2013

The soft nature of wood fibers effectively releases the mechanical stresses associated with the sodiation process, and the mesoporous structure functions as an electrolyte reservoir that allows for ion transport through the outer and inner surface of the fiber. Pores in the fiber wall allow for intercellular fluid transportation.

Maryland 199

Maryland Grid Li-ion Battery 199

Green Car Congress

FEBRUARY 27, 2016

Components built with solid ion conductors, especially separators, have the potential to serve as enabling platforms, as demonstrated by the wide application of Yttria-Stabilized Zirconia (YSZ) ceramics and perfluorosulfonic acid (PFSA) polymers (e.g., flow batteries); Alkaline conductors with high chemical stability and conductivity; and.

Li-ion 150

Li-ion Fuel Battery Batteries 150

Green Car Congress

NOVEMBER 9, 2011

ITM Power reported that a recently completed three-year collaboration project co-funded by the UK Technology Strategy Board (TSB) resulted in a new alkaline solid polymer membrane for an electrolyzer. The new electrolyzer membrane platform operates in a re-circulating liquid alkaline environment and transports OH - rather than H + ions.

Hydrogen 218

Hydrogen Cost Of Power Powered 218

Green Car Congress

OCTOBER 3, 2011

(Left) Schematic illustration showing conductive wrapping of graphene/MnO 2 (GM) to introduce an additional electron transport path (in a discharge cycle). This approach, they conclude, is also applicable to a wide range of insulating energy storage electrode materials such as sulfur, LiMnPO 4 , and silicon in lithium-ion batteries.

Energy Storage 186

Energy Storage Range GMC Battery 186

Green Car Congress

DECEMBER 17, 2016

The 16 REFUEL projects seek to develop scalable technologies for converting water and molecules from the air into energy-dense, carbon-neutral liquid fuels (CNLFs) using electrical energy from renewable sources. FuelCell Energy, Inc. Giner, Inc. High-Efficiency Ammonia Production from Water and Nitrogen (Category 1).

Carbon 150

Carbon Energy Fuel Hydrogen 150

Green Car Congress

FEBRUARY 19, 2009

Manganese is also abundant and low-cost and with the use of proprietary additives, CPI believes a calendar life of more than 15 years is achievable within a vehicle with proper design and operation. LG Chem will be supplying a Lithium polymer pack for the Hyundai Blue Drive system expected to be released in 2009. Earlier post.).

Li-ion 170

Li-ion Power Powered Market 170

Green Car Congress

OCTOBER 26, 2009

The projects selected are grouped into 10 areas: Energy Storage (6 projects). Biomass Energy (5 projects). Conventional Energy (1 project). ENERGY STORAGE. Electronville: High-Amperage Energy Storage Device-Energy Storage for the Neighborhood. Carbon Capture (5 projects).

Energy 231

Energy Grant Low Cost Li-ion 231

Green Car Congress

JANUARY 21, 2016

US Energy Secretary Ernest Moniz used the Washington DC Auto show as the venue to announce $58 million in funding for vehicle technology advancements. Area of Interest (AOI) 3: Accelerated Development and Deployment of Low-Cost Automotive Mg Sheet Components. Carbon Fiber Polymer Composite. per pound of weight saved.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

APRIL 10, 2012

Applicants are sought to develop electrochemical energy storage technologies which support commercialization of micro, mild, and full HEVs, PHEVs, and EVs. Innovative subsystem component technologies in the areas of high-resolution low-cost NO x and NH 3 sensors. Subsystem Component Technologies.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210