Green Car Congress

SEPTEMBER 11, 2019

Researchers at Georgia Tech have developed a promising new conversion-type cathode and electrolyte system that replaces expensive metals and traditional liquid electrolyte with lower cost transition metal fluorides and a solid polymer electrolyte. A paper on their work is published in the journal Nature Materials. —Huang et al.

Polymer 230

Polymer Georgia Conversion Battery 230

Baua Electric

JULY 17, 2024

“We believe it’s an exciting time for India’s energy transition into hydrogen, and we are excited to be a part of this transformation,” he added. Protonas , a startup specialising in low-cost polymer electrolyte membrane (PEM) hydrogen fuel cell solutions , has secured an undisclosed amount of funding in a round led by Transition VC.

Low Cost 52

Low Cost Hydrogen Auto India 52

Green Car Congress

JULY 24, 2017

Researchers in Sweden and Italy have devised a simple strategy to address the issues currently hampering commercialization of high-energy density Li-sulfure batteries, including. limited practical energy density, life time and the scaling-up of materials and production processes. Navarra, M. and Scrosati, B. 201700977.

Polymer 186

Polymer Li-ion Energy Battery 186

Green Car Congress

SEPTEMBER 2, 2021

The first Energy Earthshot, launched 7 June—Hydrogen Shot—seeks to reduce the cost of clean hydrogen by 80% to $1 per 1 kilogram in 1 decade (“1-1-1”). Achieving the Hydrogen Shot’s $1/kg cost goal will enable new markets for hydrogen, including energy storage, steel manufacturing, clean ammonia, and heavy-duty trucks.

Hydrogen 321

Hydrogen Energy Storage Clean Cleaning 321

Green Car Congress

JULY 7, 2015

The lead inventors of the technology are UCSB professor Dr. Alan Heeger, the recipient of a Nobel Prize in 2000 for the discovery and development of conductive polymers, and Dr. David Vonlanthen, a project scientist and expert in energy storage at UCSB. David Vonlanthen, a project scientist and expert in energy storage at UCSB.

Polymer 150

Polymer Li-ion Low Cost 2014 150

Green Car Congress

OCTOBER 20, 2022

Anovion, with its partners, collaborators and stakeholders, will build 35,000 tons per annum of new synthetic graphite anode material capacity for lithium-ion batteries used in electric vehicles and critical energy storage applications. Solvay Specialty Polymers USA , Solvay Battery-Grade PVDF Manufacturing Facility, $178,218,568.

Parts 459

Parts Battery Batteries Lithium Ion 459

Green Car Congress

MARCH 19, 2018

Rolls-Royce has signed a collaboration agreement with UK-based technology start-up Superdielectrics Ltd to explore the potential of using novel hydrophilic polymers to create next-generation high-energy storage technology. Existing supercapacitors on the market typically reach 0.3F/cm

Energy Storage 170

Energy Storage Energy Polymer Lithium Ion 170

Green Car Congress

JUNE 1, 2015

Stanford University scientists have created a new ultrahigh surface area three-dimensional porous graphitic carbon material that significantly boosts the performance of energy-storage technologies. The process begins with conducting hydrogel, a water-based polymer with a spongy texture similar to soft contact lenses.

Energy Storage 150

Energy Storage Carbon Lithium Sulfur Energy 150

Green Car Congress

JANUARY 7, 2015

A team from the University of Rome Sapienza has developed a rechargeable lithium-ion polymer battery based on the combination of a high capacity sulfur-carbon cathode, nanostructured Li x Sn-C anode and polysulfide-added PEO-based gel membrane. mAh g S -1 , depending on the cycling rate. —Agostini & Hassoun (2015).

Li-ion 150

Li-ion Polymer Lithium Sulfur Energy 150

Green Car Congress

JANUARY 24, 2020

Funded through the Office of Energy Efficiency and Renewable Energy, this funding opportunity ( DE-FOA-0002197 ) supports projects in advanced batteries and electrification in support of the recently announced DOE Energy Storage Grand Challenge ( earlier post ). Energy Efficient Mobility Systems (up to $13.5

Alternative Fuels 305

Alternative Fuels Vehicles Lithium Ion 2020 305

Green Car Congress

NOVEMBER 25, 2009

The US Department of Energy is awarding $620 million for projects around the country to demonstrate advanced Smart Grid technologies and integrated systems. The selected projects include advanced battery systems (including flow batteries), flywheels, and compressed air energy systems. Tehachapi Wind Energy Storage Project.

Energy Storage 270

Energy Storage Grid Energy Wind 270

Green Car Congress

JANUARY 20, 2017

Advanced energy-storage and energy-harvesting devices, catalyst supports, sensors, flexible electronic devices, lightweight structural composites, building materials, insulation, cutting tools, and membranes are examples of the important and rapidly growing applications of one dimensional (1D) dielectric and semiconductor (ceramic) nanomaterials.

Low Cost 150

Low Cost Georgia Li-ion Battery 150

Green Car Congress

OCTOBER 12, 2017

The research was supported by the Advanced Research Projects Agency – Energy (ARPA-E) and reported in the journal Nature. Seals are normally made from flexible polymers, but they cannot withstand high temperatures. Henry and Amy used the special properties of graphite—flexibility and strength—to make the seals.

Energy Storage 170

Energy Storage Hydrogen Energy Georgia 170

Green Car Congress

MARCH 8, 2013

The battery shows an energy density of up to 446 Wh kg -1 —about 80% higher than conventional Li-ion batteries, and much higher than energy densities reported for earlier ARLBs (30–45 Wh kg -1 ). The coating of the Li metal consists of a home-made gel polymer electrolyte (GPE) and a LISICON film.

Li-ion 281

Li-ion Low Cost Recharge Ni-Li 281

Green Car Congress

JULY 17, 2020

Funded through the US Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE), projects will conduct research in advanced batteries, electrification, and manufacturing in support of DOE’s Energy Storage Grand Challenge. Solid State Lithium Ion Batteries using Silicon Composite Anodes.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

SEPTEMBER 14, 2016

By creating high performance parts built with solid ion conductors—solids in which ions can be mobile and store energy—the IONICS program will focus on new ways to process and integrate these parts into devices with the goal of accelerating their commercial deployment. —ARPA-E Director Dr. Ellen D. Ionic Materials.

Li-ion 150

Li-ion Polymer Battery Batteries 150

Green Car Congress

JANUARY 13, 2021

This proposed project will significantly (1) reduce Si anode costs; (2) improve efficiency and reduce waste in production; (3) reduce engineering and cost risks; and (4) reduce EV battery costs and accelerate the move to clean transportation and renewable energy. 24M Technologies, Inc. Cambridge Electronics, Inc.

Li-ion 199

Li-ion Battery Batteries Lithium Ion 199

Green Car Congress

APRIL 30, 2022

However, the cost of producing MEAs is high and the durability is often poor. Momentum Materials Solutions, a University of Calgary spin-off venture, has developed new MEA technology that shows reproducible high performance, high durability, and low cost which is a potential solution for the hydrogen fuel cell market.

Canada 304

Canada Li-ion Emissions Vehicles 304

Cars That Think

SEPTEMBER 8, 2024

Electrochemical processes and methods can be scaled to produce metals, ceramics, composites, and even polymers at scales previously reserved for thermochemical processes. Electrochemistry holds the potential to support the development of clean, green infrastructure beyond batteries, electrolyzers, and fuel cells.

Engine 115

Engine Production Cleaner Wind 115

Green Car Congress

MAY 2, 2017

Li-sulfur batteries are looked to as a likely next-generation higher energy density energy storage system due to the high theoretical capacity, low cost and high earth abundance of sulfur. A paper on their work is published in the ACS journal Nano Letters. — Chen et al.

Li-ion 150

Li-ion Lithium Sulfur Polymer Energy Storage 150

Green Car Congress

NOVEMBER 9, 2011

ITM Power reported that a recently completed three-year collaboration project co-funded by the UK Technology Strategy Board (TSB) resulted in a new alkaline solid polymer membrane for an electrolyzer. Low-cost balance of plant development. Low-cost injection moulded cell plates.

Hydrogen 218

Hydrogen Cost Of Power Powered 218

Green Car Congress

NOVEMBER 16, 2018

Ecolectro is developing alkaline exchange ionomers (AEIs) to enable low-cost fuel cell and electrolyzer technologies. Novel Polymer-enhanced Rechargeable Aluminum-Alkaline Battery Technology – $2,000,000. Stable Diacid Coordinated Quaternary Ammonium Polymers for 80-230 °C Fuel Cells – $2,900,000. Ionic Materials, Inc.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

JANUARY 24, 2014

EnerG2, a company manufacturing advanced nano-structured materials for next-generation energy storage, has introduced a carbon and silicon composite to boost lithium-ion battery capacity and power performance. Earlier post.). The composite material has been scaled for commercial manufacturing.

Li-ion 236

Li-ion Carbon Lithium Ion Energy Storage 236

Green Car Congress

AUGUST 21, 2014

The newly selected projects are in five areas: energy storage; power electronics and electric motors (PEEM); advanced combustion engines; materials technologies, and fuels and lubricant technologies. Energy storage (Area of Interest 1). Earlier post.). Awardees are: AWARD TABLE. Technology. Federal share. 799,336.

Engine 231

Engine Carbon Fiber Fuel Battery 231

Green Car Congress

MAY 15, 2015

The Energy Department’s Advanced Research Projects Agency-Energy (ARPA-E) will award $60 million in funding to 23 new projects aimed at creating highly efficient and scalable dry-cooling technologies for thermoelectric power plants and developing prototype technologies to explore new pathways for fusion power. SRI International.

Fusion 150

Fusion Power Powered Low Cost 150

Green Car Congress

MARCH 23, 2012

Grzegorz Milczarek from Poznan University of Technology (Poland), and Olle Inganäs from Linköping University (Sweden), have combined lignin derivatives, which are electronic insulators, with polypyrole, a conductive polymer, into an interpenetrating composite suitable for use as a battery cathode. —Milczarek and Inganäs. 1215159.

Polymer 268

Polymer Battery Batteries Renewable 268

Green Car Congress

OCTOBER 3, 2011

This approach, they conclude, is also applicable to a wide range of insulating energy storage electrode materials such as sulfur, LiMnPO 4 , and silicon in lithium-ion batteries. The ternary composite electrodes also exhibited excellent cycling performance with >95% capacitance retention over 3,000 cycles. —Yu et al.

Energy Storage 186

Energy Storage Range GMC Batteries 186

Green Car Congress

DECEMBER 31, 2012

Li-sulfur batteries—which conventionally use elemental sulfur (with conductive additives) as the cathode, an aprotic liquid electrolyte, and lithium metal as the anode—are under intensive investigation by research groups worldwide because of the promise for low-cost, high-energy storage. Earlier post.)

Li-ion 257

Li-ion Lithium Ion Battery Batteries 257

Green Car Congress

JUNE 19, 2013

The soft and mesoporous wood fiber substrate can be utilized as a new platform for low cost Na-ion batteries, the team suggests. Grid scale storage requires a low cost, safe, and environmentally benign battery system. The target application for Na-ion batteries, therefore, is grid-scale energy storage.

Maryland 199

Maryland Grid Li-ion Battery 199

Green Car Congress

FEBRUARY 15, 2022

These new GaN power devices will enable the next generation of low-cost, fast, small, and reliable power electronics, which are key for efficient power conversion in data centers, solar farms, power grids, and electric vehicles. Stanford University. The Ohio State University. University of Washington.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

JUNE 28, 2012

Various materials, including carbon materials, transition-metal oxides, conducting polymers, and hybrid composites have been widely studied as electrodes for these devices, the team notes. Ragone plots (energy density vs power density): (1) MnO 2 /Mn/MnO 2 SNTAs and (2) MnO 2 NTAs. discharging rate, and excellent cycle stability.

Li-ion 281

Li-ion Polymer Energy Storage Hybrid 281

Green Car Congress

OCTOBER 24, 2016

As part of the EMN, the HydroGEN consortium will provide industry and academia the expertise and capabilities to more quickly develop, characterize, and deploy high-performance, low-cost advanced water-splitting materials for lower cost hydrogen production.

Water 150

Water Hydrogen Production Green 150

Green Car Congress

SEPTEMBER 1, 2017

This would be the largest unit of its kind in Germany and the world’s largest PEM (Polymer Electrolyte Membrane) electrolyzer. Electrolysis using low-cost renewable electricity could be a key technology for CO 2 -free hydrogen production in the Shell Rheinland Refinery.

Hydrogen 150

Hydrogen Installation Power Powered 150

Green Car Congress

JUNE 4, 2013

Schematic illustration of 3D porous SiNP/conductive polymer hydrogel composite electrodes. Each SiNP is encapsulated in a conductive polymer surface. A team at Stanford University has developed stable silicon Li-ion battery anodes by incorporating a conducting polymer hydrogel into the Si-based material. Click to enlarge.

Li-ion 236

Li-ion Manufacturer Polymer Deep Cycle 236

Green Car Congress

NOVEMBER 12, 2009

HPL was spun out from Professor Graetzel’s laboratory at the EPFL (Ecole Polytechnique Federale de Lausanne, Switzerland) in 2003 and is focused on the development of nano-structured metal oxide energy storage materials and novel electrolytes for use in next generation lithium ion batteries. Capacity at 1C is 900 mAh.

Li-ion 199

Li-ion America Lithium Ion Polymer 199

Green Car Congress

FEBRUARY 27, 2016

Components built with solid ion conductors, especially separators, have the potential to serve as enabling platforms, as demonstrated by the wide application of Yttria-Stabilized Zirconia (YSZ) ceramics and perfluorosulfonic acid (PFSA) polymers (e.g., flow batteries); Alkaline conductors with high chemical stability and conductivity; and.

Li-ion 150

Li-ion Fuel Battery Batteries 150

Green Car Congress

SEPTEMBER 17, 2012

The Precourt Institute for Energy, the umbrella organization for energy research and education at Stanford, will fund the following four studies: Nanostructured Polymers for High-Performance Batteries. The goal is to produce stable, high-capacity lithium-ion batteries and eventually develop novel all-polymer batteries at scale.

Energy 239

Energy Vehicles Power Powered 239