Green Car Congress

FEBRUARY 15, 2019

GTI has released a site-specific engineering design titled “ Low-Carbon Renewable Natural Gas (RNG) from Wood Wastes ”. GTI led a team of engineers and scientists to produce a blueprint for converting an existing biomass facility into an RNG production site, using the wood waste feedstock and some of the existing infrastructure.

Waste 281

Waste Carbon Gas Renewable 281

Green Car Congress

APRIL 9, 2022

Samsung Heavy Industries (SHI) and Seaborg signed a partnership agreement to develop floating nuclear power plants based on Seaborg’s inherently safe Compact Molten Salt Reactor (CMSR). The floating nuclear power plant comes as a turn-key product, ready to be moored at an industrial harbor.

Hydrogen 531

Hydrogen Molten Salt Power Powered 531

Green Car Congress

JULY 7, 2023

bp ventures has committed $10 million, leading the Series B investment round, in WasteFuel , a California-based biofuels company that will use proven, scalable technologies to convert bio-based municipal and agricultural waste into lower carbon fuels, such as biomethanol. billion metric tons by 2050.

Waste 284

Waste Companies Alternative Fuels Convert 284

Green Car Congress

DECEMBER 16, 2021

IBM and Samsung Electronics jointly announced a breakthrough in semiconductor design utilizing a new vertical transistor architecture (VTFET) that demonstrates a path to scaling beyond nanosheet, and has the potential to reduce energy usage by 85% compared to a scaled fin field-effect transistor (finFET).

Design 397

Design Energy Transportation Waste 397

Green Car Congress

DECEMBER 18, 2021

Aemetis, a renewable fuels company focused on negative carbon intensity products ( earlier post ), has signed a 10-year, 450-million-gallon renewable diesel supply agreement with an industry-leading travel stop company, which is expected to generate more than $3 billion in revenue. The industrial site has 710,000 s.f.

Renewable 321

Renewable Diesel Supplies Industry 321

Green Car Congress

JANUARY 25, 2021

The National Circular Economy Roadmap found innovation is crucial to realizing Australia’s largest economic gains, which will come from designing new products and materials, including through advanced manufacturing, and in embracing new business models that will create domestic and export markets for waste streams.

Economy 418

Economy Waste Australia Market 418

Green Car Congress

AUGUST 11, 2020

The refuse trucks are anticipated to carry up to an industry-leading 720 kWh of energy storage. The refuse market is one of the most stable markets in the industry and provides long-term shareholder value. This order is to begin full production deliveries in 2023 with on-road testing likely to begin in early 2022.

Waste 284

Waste Batteries Battery Energy Storage 284

Green Car Congress

FEBRUARY 5, 2021

Under the terms of the agreement, XL Fleet and Curbtender will jointly develop a series of battery electric (BEV) and plug-in hybrid electric (PHEV) commercial trucks for use in waste management applications. The Quantum is the US Waste Industry’s #1 selling small rear loader. Curbtender Quantum.

Plug-in 418

Plug-in Fleet All-Electric Plug 418

Green Car Congress

AUGUST 1, 2021

LanzaTech’s Project DRAGON (Decarbonizing and Reimagining Aviation for the Goal Of Netzero) will undertake the Front-End Engineering Design (FEED) of a facility in Port Talbot, South Wales, that will produce more than 100 million liters per year of ATJ Synthetic Paraffinic Kerosene (ATJ-SPK).

Waste 210

Waste Georgia Commercial London 210

Green Car Congress

JANUARY 14, 2022

Cellulose to Sugar) reactor system that has been designed to allow further process optimization as compared to earlier systems. Blue Biofuels has initiated the development of the 5 th generation CTS reactor based on the design parameters of the successful 4 th generation system. Sugars are subsequently processed into biofuels.

Conversion 459

Conversion Waste Convert Fuel 459

Green Car Congress

AUGUST 22, 2019

Velocys is leading the development of the project and has assembled all the technology components into a standardized integrated design. This is an important step in the reduction of the airline’s carbon emissions towards the industry targets of carbon neutral growth from 2020 and a 50% reduction by 2050 from 2005 levels.

Waste 236

Waste Fuel Alternative Fuels 2005 236

Green Car Congress

OCTOBER 27, 2021

The recycling of plastic waste plays a large conceptual role in the quesst for the realization of a circular economy. Polypropylene constitutes about 30% of all plastic waste. This suggests that the design of catalysts that can control the selectivity of this process is challenging. Shibashish D. Jaydev, Antonio J.

Oil 389

Oil Motors Motoring Motor 389

Green Car Congress

MAY 11, 2021

Rio Tinto has successfully developed and tested a steel powder designed for 3-D printing applications at its Rio Tinto Fer et Titane (RTFT) metallurgical complex in Sorel-Tracy, Québec. RTFT is developing a range of additional powder grades with advanced properties for 3-D printing to meet customer needs.

North America 417

North America Water Manufacturer Waste 417

Green Car Congress

DECEMBER 7, 2020

Due to its higher energy density, LMFP should reduce the range anxiety associated with standard LFP formulations designed for EVs. VSPC’s active program to reduce costs even further includes its evaluation of industrial waste materials as feed, as well as the production of cathode-material precursors derived from spent LIBs.

Energy 418

Energy Li-ion Australia Waste 418

Green Car Congress

JANUARY 6, 2022

Initial life cycle assessments demonstrate either reduced carbon emissions compared with current methods of carbon black production or the use of bio-based or waste feedstock sources. A high-quality silica has been produced from this waste ash. A high-quality silica has been produced from this waste ash.

Waste 468

Waste Oil Maintenance Carbon 468

Green Car Congress

AUGUST 13, 2020

The first-of-its-kind continuous catalytic process was designed to reduce production costs relative to batch chemistry, the prior state-of-the-art technology. With this research, we looked to make a new biofuel conversion process that is relevant and applicable to renewable and waste-to-energy technology. Hafenstine et al.

Waste 221

Waste Renewable Diesel Cleaner 221

Green Car Congress

NOVEMBER 25, 2020

The companies are joining efforts to implement the carbon-negative UBQ thermoplastic ( earlier post ) into auto parts manufactured by Motherson Group for the automotive industry. UBQ Industrial Grade. As a bio-based composite thermoplastic material, UBQ Industrial Grade can replace plastic polymers in hundreds of applications.

Parts 362

Parts Carbon Auto Polymer 362

Green Car Congress

JANUARY 27, 2022

Carrier is further expanding its electrification capabilities through a new alliance with ConMet , adding trailer wheel-based power generation that captures energy that otherwise would be wasted during braking events. The electricity is stored in a high-capacity battery and then shared with other parts of the vehicle as needed.

Transportation 435

Transportation Emissions Waste Store 435

Green Car Congress

AUGUST 1, 2021

The UK Department for Transport has shortlisted 8 industry-led projects to receive a share of £15 million (US$21 million) in the Green Fuels, Green Skies (GFGS) competition for the development of sustainable aviation fuels (SAF) production plants in the UK. Research indicates that by 2040 the SAF sector could generate between £0.7

Fuel 321

Fuel Waste Production Convert 321

Green Car Congress

APRIL 12, 2018

Dürr is building a paint shop in Mexico for the BMW Group that meets the requirements for connected Industry 4.0 The waste water treatment plant, the deionization system of the water (DI plant), and the shop ventilation are also included in the scope of services. production.

BMW 253

BMW Mexico Industry Industrial 253

Green Car Congress

MARCH 11, 2020

The backhoe loader is perfectly suited for electrification as the varied use cycles, from heavy to light work, provide an excellent opportunity to convert wasted diesel engine hours into zero consumption battery time—yet provide the operator with instantaneous torque response when needed. and Moog Inc.,

Fully Electric 536

Fully Electric Diesel Electric Electrical 536

Green Car Congress

FEBRUARY 21, 2019

In Australia, QUT researchers and Mercurius Australia are partnering on a pilot plant to prove the economic viability of turning sugarcane waste into either jet and diesel fuel or chemicals that could be used to make plastic soft drink and beer bottles. Does not use enzymes or microbes therefore it is not sensitive to feedstock impurities.

Convert 250

Convert Australia Waste Diesel 250

Green Car Congress

APRIL 13, 2021

Traditional PEM fuel cells have a relatively low operating temperature, which makes for a low tolerance to hydrogen fuel impurities and makes waste-heat rejection a challenge for vehicles. As the heavy-duty transportation industry seeks greener alternatives to combustion engines, HT-PEM fuel cells promise a clean, efficient alternative.

Fuel 468

Fuel Hydrogen Water Polymer 468

Green Car Congress

DECEMBER 23, 2022

Raven SR, a renewable fuels company, and Chart Industries will collaborate globally on the liquefaction, storage, and transportation of hydrogen as well as pure carbon dioxide produced from Raven SR’s non-combustion Steam/CO 2 Reformation process of converting waste to renewable fuel. —Matt Murdock, CEO of Raven SR.

Hydrogen 170

Hydrogen Carbon Industry Industrial 170

Green Car Congress

APRIL 26, 2022

million grant from the US Department of Energy to design and engineer an integrated carbon dioxide capture and conversion plant co-located at Nutrien’s Kennewick Fertilizer Operations plant in Kennewick, Wash. We are converting common industrial waste streams into product streams —Todd Brix.

Conversion 281

Conversion Grant Waste CO2 281

Green Car Congress

JULY 22, 2022

The monocoque and body panels are manufactured via 3D printing, resulting in almost no residual waste. We want to tickle the industry by showing what is already possible. If 35 students can design, develop and build an almost carbon-neutral car in a year, then there are also opportunities and possibilities for the industry.

Carbon 435

Carbon Store Waste Concept 435

Green Car Congress

JULY 6, 2022

With the SCT E-motor, MAHLE thus becomes a full-range provider in the field of electric drives and covers all needs from e-scooters to heavy-duty commercial vehicles as well as off-road and industrial applications. The SCT E-motor, on the other hand, is designed in such a way that it is particularly efficient within a certain rpm range.

Motors 447

Motors Motoring Motor Concept 447

Green Car Congress

SEPTEMBER 24, 2020

Invented and designed for the next generation of electric vehicles, the Ingear features a simple and durable design that enables a more efficient powertrain, with extended range, at lower cost. The Ingear has consistent/repeatable shifts by design. Shifts can be completed in as little as 19 milliseconds. Ingear core unit.

Extended Range 508

Extended Range Motors Motoring Motor 508

Green Car Congress

JUNE 26, 2020

Two versions of the process were developed more or less in parallel, with the U-GAS technology developed for gasification of all ranks of coal and the RENUGAS technology for gasification of highly reactive fuels such as peat, biomass, pulp mill residues and wastes. GTI gasification technology.

Renewable 221

Renewable Design Coal 2000 221

Green Car Congress

SEPTEMBER 23, 2020

Elon Musk used Tesla’s much-anticipated Battery Day presentation not to disclose some super cell, but to outline an aggressive, comprehensive and radically innovative approach to battery design, manufacturing and vehicle integration that he projected will result in a 56% reduction in cost/kWh and a $25,000 electric vehicle in about three years.

Manufacturer 269

Manufacturer Design Tesla Nevada 269

Green Car Congress

FEBRUARY 12, 2022

Capturing this waste carbon then allows for algae to be cultivated into a variety of biofuels and bioproducts. power, cement, or other industrial sources). The funding opportunity announcement ( DE-FOA-0002654 ) specifically aims to increase the capability of algal systems to capture CO 2 and put it to productive use.

Waste 186

Waste Carbon Coal Gas 186

Green Car Congress

AUGUST 7, 2022

Michigan will enable four new mobility services to help address challenges across the state related to sustainable transit, roadway safety, parking and staffing shortages in the service industry. Currently, the key players in this industry are located on the West Coast and internationally. Mouvit ($100,000).

Michigan 435

Michigan Oakland Grant Detroit 435

Green Car Congress

MAY 20, 2022

Renault Scenic Vision has an all-new platform that is purpose-designed to fit all the components: the electric motor, hydrogen engine, battery, fuel cell and hydrogen tank. Its interior design is a forward-looking study of future Renault interiors. The vehicle’s fittings are made of recycled carbon from the aeronautical industry.

Hydrogen 482

Hydrogen Carbon Concept Hybrid 482

Green Car Congress

MAY 10, 2021

The Texas Mineral Resources consortium objective is to install a self-contained, modular and portable pilot plant at a Jeddo Coal Pennsylvania site, capable of producing 1-3 metric tons of rare earth oxides derived from coal waste material from Pennsylvania anthracite coal.

Coal 170

Coal Waste Pennsylvania Texas 170

Green Car Congress

NOVEMBER 9, 2022

Since its commissioning earlier this year, the Demo Plant has verified a 163% increase in actual leach processing capacity over the 500 kg/day planned capacity and 99% leach extraction efficiency of lithium-ion battery cathode waste material using RecycLiCo’s patented closed-loop process.

Lithium Ion 345

Lithium Ion Batteries Battery Waste 345

Green Car Congress

JUNE 8, 2021

Desktop Metal, a provider of mass-production additive-manufacturing (AM) solutions, has qualified the use of 4140 low-alloy steel for the Production System platform, which leverages patent-pending Single Pass Jetting (SPJ) technology designed to achieve the fastest build speeds in the metal additive manufacturing industry. Lever Drive.

Parts 397

Parts Manufacturer Production Industry 397

Green Car Congress

APRIL 11, 2023

Understanding this process will inform the creation of synthetic designer proteins that bind with high specificity to different types of lanthanides, according to biochemist John Love. REEs are relatively abundant in mine tailings, the waste products of some metal ores, such as aluminum.

Design 225

Design San Diego Phoenix Environment 225