Green Car Congress

APRIL 2, 2015

The coupé-like design uses Jaguar’s aluminum-intensive (75% aluminum) architecture ( earlier post ) to enable weight savings of up to 190 kg (419 lbs)—making the 163PS diesel model 80 kg (176 lbs) lighter than the nearest competitor—plus an increase in torsional stiffness of up to 28%. liter diesel.

Diesel 150

Diesel Engine MPG Exhaust 150

Green Car Congress

NOVEMBER 17, 2015

TDI, a highly efficient, latest-generation V6 diesel engine, delivers 190 kW (258 hp) of power and 600 N·m (442.5 Making their world premiere in a diesel engine are active engine mounts in the Audi Q7 e-tron 3.0 Their outer skin is made from aluminum-coated polymer and this in turn brings weight advantages. TDI quattro.

Audi 150

Audi PHEV Diesel Fuel 150

Green Car Congress

AUGUST 30, 2009

kWh lithium-polymer battery pack. The output per liter of 80 kW (109 hp) achieved in this way sets a new record in diesel technology. Overall, BMW Vision EfficientDynamics comes with a total of 98 lithium-polymer cells, each offering a capacity of 30 Ah and developing continuous output of 600 Amps at a voltage of 3.7

All-Electric 268

All-Electric Plug-in Concept Plug 268

Green Car Congress

JULY 2, 2010

As one example, while Elevance’s olefin metathesis platform can deliver renewable diesel and jet from renewable oils ( earlier post ), the company’s primary initial commercial focus is on higher-value chemicals. Avantium has a process to convert carbohydrates into Furanics on the basis of novel chemical catalytic technology.

Renewable 186

Renewable Fuel Range Diesel 186

Green Car Congress

JANUARY 18, 2014

The additional content which includes the motor, inverter, converter, and on?board Temperature Combustion (LTC), (2) Dilute Gasoline Combustion, and (3) Clean Diesel Combustion. Technologies that enable LTC operation with either gasoline or diesel fuel, including control methodologies and technologies, especially for mixed?mode

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

JANUARY 25, 2011

Volkswagen is staging the world debut of its XL1 diesel plug-in hybrid electric vehicle (PHEV) prototype at the Qatar Motor Show this week. The XL1’s body electrical system is supplied with the necessary 12 Volts through a DC/DC converter. The rest of its weight is distributed among various other polymers (e.g. Click to enlarge.

Qatar 334

Qatar PHEV MPG Motor 334

Green Car Congress

NOVEMBER 20, 2014

The ultimate goal—one that Volkswagen Group and brand executives consistently emphasize—is to enable “bumper-to-bumper” production of brand models equipped with different drive systems (gasoline, diesel, natural gas, plug-in hybrid, battery-electric and fuel cell) using the same production line. Earlier post.).

Audi 278

Audi Hydrogen Fuel Concept 278

Green Car Congress

NOVEMBER 30, 2009

The CMT-380 features a lithium-polymer battery pack that supports an all-electric range of up to 80 miles. A patented combustion system achieves extremely low exhaust emissions that do not require expensive exhaust after treatment to meet stringent California Air Resources Board and EPA 2010 requirements.

Range 273

Range Auto Solar 273

Green Car Congress

MARCH 25, 2010

Although currently better known for its efforts with hydrogen-fueled internal combustion engines, BMW has researched low-temperature PEM (Polymer Electrolyte Membrane) fuel-cell technology has been researched and developed at BMW since 1997. Reformer technology can be used in gasoline and diesel engines. The on-board reformer system.

BMW 220

BMW Hydrogen Fuel Hybrid 220

Green Car Congress

AUGUST 10, 2011

This project will optimize fuel-based control of novel combustion strategies in light- and heavy-duty vehicles to enable diesel-like efficiencies with ultra-low engine-out emissions. This project will demonstrate a robust thermoelectric exhaust waste heat recovery system that provides >5% fuel efficiency improvement for a light-duty vehicle.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

JANUARY 22, 2014

For the purposes of this AOI, a carbon fiber composite is defined as a composite that combines carbon fiber with polymer resin. The fibers can be continuous or discontinuous and the resin can be either a thermoplastic or thermoset polymer. AOI 8: Development of High-Performance Low-Temperature Catalysts for Exhaust Aftertreatment. ($3M).

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252