Cheap Connect DIY 
Green Car Congress
FEBRUARY 14, 2020
I knew I wanted something for her that was cheap to maintain, had a reliable automatic transmission, came with cruise control, AC. There are also videos on Youtube where people change the pack the DIY way or the individual modules, but be aware to only buy individual modules from a trusted source. It was time to buy our first car.
Cars That Think
AUGUST 20, 2021
The handlebar-mounted controls connect with an Arduino, which interprets their settings and translates them into a PPM signal, which is applied to the electronic speed controller. The speed controller is connected to the motor and battery in the usual fashion, with an automotive-type blade fuse in line for safety.
Cars That Think
NOVEMBER 28, 2021
That successful mission in August 2018 was a huge step toward our goal of sending an amateur astronaut to the edge of space aboard one of our DIY rockets. The trickiest part, the double-curved "throat" section that connects the combustion chamber to the exhaust nozzle, requires computer-controlled machining equipment that we don't have.
Cars That Think
JULY 21, 2021
I added a DIY solder squid—a block with four flexible arms that I use to hold components in place while soldering—with a concrete base and an automatic solder fume extractor. The Grounduino provides screw terminals for hooking wires to the Nano and, as the name suggests, five extra ground connections (and five extra 5V connections as well).
Cars That Think
AUGUST 20, 2021
The handlebar-mounted controls connect with an Arduino, which interprets their settings and translates them into a PPM signal, which is applied to the electronic speed controller. The speed controller is connected to the motor and battery in the usual fashion, with an automotive-type blade fuse in line for safety.
Cars That Think
JULY 30, 2021
Just about every device you own is probably available with Internet connectivity. needs Internet connectivity is up for debate. Connectivity usually comes at a premium, and it also usually involves buying a brand new whatever it is, because new hardware and software and services are required.
Cars That Think
NOVEMBER 30, 2024
These contain a TEF6686 chip in a DIY-friendly package, suitable for through-hole soldering (the TEF6686 itself is a surface-mounted chip), and with radio-frequency shielding to help minimize interference. These modules are cheap—they can generally be found for around US $25. Soldering it together will take about 2 hours.
Expert insights. Personalized for you.
409 
Let's personalize your content