Green Car Congress

DECEMBER 17, 2019

The initial H2@Scale FOA, released by EERE in FY19, focused on enabling R&D for hydrogen production, transport, and storage, as well as first-of-kind pilot demonstrations of integrated systems with on-site nuclear power and multiple renewable energy sources. Advanced Carbon Fiber for Compressed Hydrogen and Natural Gas Storage Tanks.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

AUGUST 21, 2015

A team led by Dr. Stuart Licht at The George Washington University in Washington, DC has developed a low-cost, high-yield and scalable process for the electrolytic conversion of atmospheric CO 2 dissolved in molten carbonates into carbon nanofibers (CNFs.)

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Precursor Development for Low-Cost, High-Strength Carbon Fiber. Advanced Water Splitting Materials. Giner, Inc.

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

SEPTEMBER 6, 2019

Manufacturers are usually faced with a compromise between energy and power density as they try to minimize the size and weight of battery packs for a target performance level. Currently, Samsung cylindrical cells provide energy density, while pouch cells from A123 systems provide high power.

Engine 191

Engine Batteries Battery Carbon Fiber 191

Green Car Congress

MAY 19, 2014

A new review article in the journal Science highlights emerging opportunities to increase the transformation of lignin to value-added products—i.e., Each product stream, however, has its own distinct challenges. lignin valorization. Simplified process flow diagram illustrating paths to recover lignin.

Production 225

Production Carbon Fiber Polymer Fuel 225

Green Car Congress

FEBRUARY 15, 2022

Breaking the Board: Bringing Three-Dimensional Packaging and Thermal Management to Power Electronics - $2,746,501. Synteris is developing 3D-printable ceramic packaging for power electronic modules to improve their thermal management, power density, performance, and lifetime. Cornell University. Stanford University.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

JANUARY 4, 2020

These projects aim to develop tools, methods, and technologies to enhance cost-effectively the safety and efficiency of the US’ natural gas production, gathering, storage, and transmission infrastructure. AOI 2: Process-Intensified Technologies for the Upcycling of Flare Gas into Transportable, Value-Added Products.

Gas 186

Gas Gas-Electric Carbon Fiber West Virginia 186

Green Car Congress

MARCH 31, 2014

By the end of Phase II, Mainstream plans to demonstrate a production-ready prototype that exceeds DOE targets for fuel economy, operating range, and cost. Low-Cost, High-Energy Si/Graphene Anodes for Li-Ion Batteries. Project partners include Georgia Institute of Technology and LG Chem Power Inc. Nextech Materials.

Exhaust 261

Exhaust Wind 2014 Motor 261

Green Car Congress

OCTOBER 31, 2013

The goal is to enable the widespread commercialization of hydrogen and fuel cell technologies and specifically to provide adequate hydrogen storage for onboard vehicle applications that meet the DOE hydrogen storage targets, as well as enabling early market applications such as materials handling equipment and portable power applications.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

NOVEMBER 15, 2021

To study new options, the two companies plan to enter and conduct verification tests of two new vehicles powered by carbon-neutral synthetic fuel derived from biomass in the ST-Q class of the 2022 season of the Super Taikyu Series. Fukuoka City hydrogen production facility.

Mazda 387

Mazda Hydrogen Toyota Transportation 387

Green Car Congress

AUGUST 10, 2011

This project will enable diesel-like efficiency and increased maximum power output in a gasoline engine by using a secondary fuel to suppress engine knock under high load. This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. Plasan Carbon Composites. UChicago Argonne LLC.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

JANUARY 9, 2015

IACMI is dedicated to overcoming these barriers by developing low-cost, high-production, energy-efficient manufacturing and recycling processes for composites applications. Dow Chemical Company; DowAksa; DuPont; ESI North America; Evonik Corporation; Faurecia US Holdings; Fives; Ford Motor Company; GE Water & Power; Graco Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

NOVEMBER 17, 2016

The objective of this area of interest is to develop and demonstrate both technology and supplier readiness for the production of electric traction drive systems that can meet specified technical targets, including cost of ≤$8/kilowatt (kW); specific power of ≥1.4 kW/kilogram; power density of ≥4.0

Carbon Fiber 150

Carbon Fiber Vehicles Nickel Lithium Low Cost 150

Green Car Congress

SEPTEMBER 18, 2015

The US Department of Energy (DOE) is awarding nearly $55 million for 24 projects to develop and deploy advanced vehicle technologies, supporting the Energy Department’s EV Everywhere Grand Challenge to make plug-in electric vehicles as affordable to own and operate as today’s gasoline-powered vehicles by 2022. General Motors. 1,608,687.

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

MAY 29, 2010

Nicknamed “fuzzy fiber” by its inventor at UDRI, Nano Adaptive Hybrid Fabric (NAHF-XTM) is the first tailored nanomaterial capable of being produced in sizes and quantities large enough to make them affordable and viable for large-scale commercial use. Everybody is growing carbon nanotubes on substrates. Khalid Lafdi. Brian Rice.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

AUGUST 26, 2016

million in federal funding for cost-shared projects that will develop technologies that utilize CO 2 from coal-fired power plants to produce useful products. Another option is to use the CO 2 as a reagent to create useful products, such as cement, plastics, or liquid fuels. —DE-FOA-0001622.

Convert 150

Convert Production Coal CO2 150

Green Car Congress

JUNE 21, 2017

million for 30 projects working toward the discovery and development of innovative, low-cost materials needed for hydrogen production and storage and for automotive fuel cells ( earlier post ). The US Department of Energy is awarding roughly $15.8

Fuel 150

Fuel Carbon Fiber Low Cost Hydrogen 150

Green Car Congress

OCTOBER 30, 2022

For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets. Today, city trucks in China are predominantly hitting the roads as Chinese manufacturers leverage their experience in electric buses and battery production.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

AUGUST 14, 2014

The largest single award ($10 million) goes to Delphi Automotive Systems to further the development of its Gasoline Direct-Injection Compression Ignition (GDCI) low-temperature combustion technology ( earlier post ) that provides high thermal efficiency with low NO x and PM emissions. Liox Power. Description. Alcoa, Inc.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

AUGUST 18, 2017

Both models are powered by a bivalent 2.0 TFSI engine powers both the A4 Avant g-tron and the A5 Sportback g-tron. TFSI engine powers both the A4 Avant g-tron and the A5 Sportback g-tron. The newly developed engine is based on the new gasoline-powered 2.0 TFSI engine developing 170 hp. g/mi) (in gasoline mode: 5.5

Audi 150

Audi Gas Available Standards 150

Green Car Congress

JANUARY 22, 2014

Area Of Interest (AOI) 1: Development of Low-Cost, High-Strength Automotive Aluminum Sheet. This AOI is to address two major technical gaps in the performance of automotive aluminum alloys: Low strength among cost competitive automotive sheet alloys such as 5xxx and 6xxx series. Click to enlarge.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

SEPTEMBER 16, 2010

These projects, funded as part of DOE’s Small Business Phase III Xlerator program, will help small businesses develop manufacturing processes to scale up production of their new, proven technologies. Included among the selected projects is one for algal biofuels, three for vehicle technologies and four for fuel cells.

Fuel 210

Fuel Energy Carbon Fiber Polymer 210

Green Car Congress

DECEMBER 20, 2015

Accelerated Development and Deployment of Low-Cost Automotive Magnesium (Mg) Sheet Components. Dissimilar metal joint systems are limited to aluminum, steel, magnesium, and carbon fiber composites. Advances for the Production of Low Cost Electric Drive Vehicle Motors. per pound of weight saved.

Li-ion 150

Li-ion Vehicles Low Cost Grid 150

Green Car Congress

DECEMBER 16, 2010

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Subtopics include: Low-Cost Development of Magnesium. Development of Low-Cost Carbon Fiber.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

JANUARY 21, 2016

Secretary Moniz also announced that two innovative projects at CALSTART and the National Association of Regional Councils will receive $3 million to develop systems that help companies combine their purchasing of advanced vehicles, components, and infrastructure to reduce incremental cost and achieve economies of scale.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

AUGUST 16, 2016

The Vehicle Technologies Office Program Wide Selections will aim to reduce the cost and improve the efficiency of plug-in electric, alternative fuel, and conventional vehicles through thirty-five projects addressing 11 areas of interest. Electric Power Research Institute, Inc. Description. Federal funding. Description. Federal funding.

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150

Green Car Congress

OCTOBER 4, 2009

In a news conference at the Japan National Press Club on Friday, Toyota Motor President Akio Toyoda said that the company plans to begin mass production of electric vehicles in the US in 2012, followed by US production of fuel cell vehicles in 2015. The company is working to develop a low-cost CFRP for a high-pressure hydrogen tank.

2015 315

2015 Toyota Commercial Fuel 315

Green Car Congress

APRIL 10, 2012

Phase I projects must complete (1) a preliminary design; (2) a characterization of laboratory devices using the best measurements available, including a description of the measurement methods; and (3) the preparation of a road map with major milestones, that would lead to a production model of a system that would be built in Phase II.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

APRIL 29, 2015

At SAE 2015 World Congress last week, Toyota presented a set of four technical papers describing some of the technology innovations used in its production fuel cell hybrid electric vehicle Mirai ( earlier post ). The Mirai FC system achieves a power density of 3.1 compared to the conventional FC stack. kW/L and 2.0 Boost converter.

Congress 150

Congress Toyota Fuel Carbon Fiber 150

Green Car Congress

MARCH 1, 2016

The battery powers the motors that drive the wheels. In 2010, Jaguar introduced a similar concept, the C-X75 extended range electric vehicle that used twin gas micro-turbines from Bladon Jets to power two switched reluctance generators from SR Drives. Earlier post.). Techrules AT96 (liquid fueled) TREV supercar on the track.

Range 150

Range Companies China Carbon Fiber 150

Green Car Congress

JULY 10, 2010

Harvesting/Dewatering Technology for Algal Biofuels Production. The Office of Biomass Program (OBP) is seeking Phase III applications to further commercial development of harvesting/dewatering processes—contingent upon successful completion of SBIR Phase I or Phase II development—to support the production of algal biofuels.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

DECEMBER 11, 2015

Hydrogen Production R&D: High-Temperature Water Splitting compatible with renewable and sustainable energy sources; Advanced Compression; and Advanced Vacuum Insulation for automotive applications. AOI 4: Cost and Performance Analysis for Fuel Cells; for Hydrogen Storage; and for Hydrogen Production and Delivery.

Hydrogen 150

Hydrogen Fuel Climate Production 150

Green Car Congress

SEPTEMBER 7, 2016

The A5 g-tron is powered by a 2.0 It develops 125 kW (170 hp) of power and 270 N·m (199 lb-ft) of torque. The newly developed engine is based on the gasoline-powered 2.0 The third glass fiber layer helps to visualize any external effects. The drive unit’s high efficiency means low costs of ownership.

Audi 150

Audi Gas Gasoline Available 150

Baua Electric

MARCH 6, 2024

All the other budget e-bikes under $800 use a 36V system and thus suffer from weaker power. If you like the idea of a low-cost US-based company like Lectric eBikes but want something with more power than their XP LITE, consider the $999 Lectric XP 3.0. Ah (375 Wh) Weight : 21 kg (46 lb) Price : $799 Lectric XP 3.0

Price 52

Price Buy MPH Electric 52

Green Car Congress

FEBRUARY 2, 2013

As part of the Advanced Vehicle Power Technology Alliance between DOE and the Department of the Army, the Army plans to contribute $3.5 Further, alloying or coating pathways towards low-cost, effective passive films, have not been sufficiently explored in a sound and scientific way. Carbon Fiber Polymer Composite.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

DECEMBER 18, 2009

The cost-sharing awards represent up to $146 million in new research over the next two to five years. The two Li-ion electrode projects selected were Silicon Nanowire Production for Advanced Lithium-Ion Batteries by Amprius, Inc. Silicon Nanowire Production for Advanced Lithium-Ion Batteries. Amprius, Inc., A123Systems, Inc.

Manufacturer 186

Manufacturer Lithium Ion Li-ion Low Cost 186

Baua Electric

JANUARY 13, 2024

All the other budget e-bikes under $800 use a 36V system and thus suffer from weaker power. If you like the idea of a low-cost US-based company like Lectric eBikes but want something with more power than their XP LITE, consider the $999 Lectric XP 3.0. Ah (375 Wh) Weight : 21 kg (46 lb) Price : $799 Lectric XP 3.0

Price 52

Price Buy MPH Electric 52