article thumbnail

First prototype carbon fiber chassis delivered from new £50M McLaren Automotive innovation and manufacturing center

Green Car Congress

The first prototype carbon fiber MonoCell, the tub that forms the main structure of McLaren’s cars, has been shipped from the company’s new £50-million (US$66-million) innovation and production center in Yorkshire to the McLaren Production center (MPC) in Woking, Surrey. All McLaren’s sportscars and supercars will be hybrid by 2024.

article thumbnail

SoCalGas, partners developing technology to make carbon fiber during hydrogen production from methane; reducing the cost of H2 and cutting GHG

Green Car Congress

(SoCalGas) is partnering with a development team to advance a new process that converts natural gas to hydrogen, carbon fiber, and carbon nanotubes. In addition, this technology will virtually eliminate CO 2 emissions from the methane-to-hydrogen process. The global CNT market was estimated at approximately $3.5

article thumbnail

Terrafugia obtains FAA Special Light-Sport Airworthiness Certificate for roadable aircraft; “flying car”

Green Car Congress

Powered by a 100-hp Rotax 912iS Sport fuel-injected engine with a 2,000 hr TBO, the vehicle has a flight speed of 100 mph and runs on either premium gasoline or 100LL airplane fuel.

Light 397
article thumbnail

Audi introduces new CNG A3 Sportback

Green Car Congress

This is supplemented by the additional range offered by the reserve gasoline tank with a net usable volume of 9 liters (2.4 The four-cylinder always starts in CNG mode, only injecting slight amounts of gasoline under rare operating conditions. US gal) mounted in front of the rear axle. The driver does not notice this switch.

Audi 504
article thumbnail

DOE issues $10M incubator FOA for batteries, power electronics, engines, materials, fuels and lubricants

Green Car Congress

Temperature Combustion (LTC), (2) Dilute Gasoline Combustion, and (3) Clean Diesel Combustion. Technologies that enable LTC operation with either gasoline or diesel fuel, including control methodologies and technologies, especially for mixed?mode Carbon Fiber or Lightweight Materials. The following are sample topic areas.

article thumbnail

BMW begins road testing of i Hydrogen NEXT; small-series production model in late 2022

Green Car Congress

As a result, the system delivers an output of 275 kW/374 hp that corresponds exactly to that of the most powerful six-cylinder in-line gasoline engine currently used in BMW models. The energy stored in the performance buffer battery is generated by recovering energy from coasting overrun and braking phases.

BMW 482
article thumbnail

GM introduces CNG bi-fuel Chevrolet Silverado and GMC Sierra pickups

Green Car Congress

V8 engine that seamlessly transitions between CNG and gasoline fuel systems. With both CNG and gasoline tanks full, the trucks offer a range of more than 650 miles. The trucks use a 17-gallon Type 3 CNG tank made from composite material with aluminum liner and carbon fiber wrap. Bosch supplies the fuel injection system.

Sierra 291