Green Car Congress

SEPTEMBER 2, 2011

SGL Automotive Carbon Fibers (SGL ACF)—a joint venture of SGL Group and the BMW Group ( earlier post )—officially opened its new carbon fiber manufacturing plant in Moses Lake, WA. All electricity needed for the production of carbon fibers will come from local hydropower.

Carbon Fiber 218

Carbon Fiber BMW Carbon Germany 218

Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Carbon fiber composites have been used in aerospace and racing cars for decades due to their unique combination of high strength and low mass.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Green Car Congress

DECEMBER 11, 2014

to acquire its European carbon fiber fabric and prepreg business. In Europe, Toray currently is engaged in carbon fiber business starting from polyacrylonitrile (PAN) precursor at its French subsidiary, Toray Carbon Fibers Europe S.A. Toray Industries, Inc. has reached a basic agreement with Saati S.p.A

Carbon Fiber 199

Carbon Fiber Carbon Italy Europe 199

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

JULY 22, 2020

Borealis, a supplier of polyolefin plastic materials for engineering applications in the automotive industry, announced the availability of Fibremod, its innovative carbon and glass fiber-reinforced polypropylene (PP) technology, for the North American automotive market. Fibremod PP long glass fiber (LGF).

Carbon Fiber 221

Carbon Fiber Carbon Available Market 221

Green Car Congress

JUNE 1, 2010

has developed a new automotive carbon fiber material that is as easy to process as metal. The developers reckon that it can be made into a wide variety of components, including bodies and engine parts. to develop technology for mass-producing parts made from the material, which could make cars lighter.

Carbon Fiber 186

Carbon Fiber Carbon Mitsubishi Honda 186

Green Car Congress

JANUARY 12, 2015

Ford and DowAksa are accelerating joint research to develop high-volume manufacturing techniques for automotive-grade carbon fiber, aiming to make vehicles lighter for greater fuel efficiency, performance and capability. Ford and Dow Chemical began working together in 2012 to develop low-cost, high-volume carbon fiber composites.

Carbon Fiber 150

Carbon Fiber Carbon Parts Ford 150

Green Car Congress

MAY 19, 2015

Solvay is taking a “leadership role” in the development of the Polimotor 2 all-plastic automotive engine to be tested in a race car next year, demonstrating the company’s advanced specialty polymer technologies in light-weighting through metal replacement. Mustang engine, used a combination of carbon fiber, Torlon, epoxy, ceramic and metal.

Carbon Fiber 150

Carbon Fiber Polymer Carbon Engine 150

Green Car Congress

MARCH 23, 2021

It contains carbon fiber that serves simultaneously as an electrode, conductor, and load-bearing material. The structural battery uses carbon fiber as a negative electrode, and a lithium iron phosphate-coated aluminum foil as the positive electrode. GPa, and tensile strength exceeding 300?MPa. Image: Marcus Folino.

Carbon Fiber 416

Carbon Fiber Batteries Battery Lithium Ion 416

Green Car Congress

FEBRUARY 10, 2019

The completed engineering prototype of the Stage 2 rocket (the stage that will transit into orbital flight after launch) is made from a specially-formulated lightweight carbon fiber and aluminum composite and includes the world’s largest 3D printed rocket engine. The 3D printed engine.

Engine 353

Engine Fuel Carbon Fiber Highlander 353

Green Car Congress

DECEMBER 8, 2017

Today, acrylonitrile is used in the production of acrylic fibers for carpets, clothes, and fabrics, and in plastics such as food containers, and packaging materials. The high acrylonitrile yield allows us to propose a potential industrial process for the conversion of lignocellulosic biomass to renewable acrylonitrile and carbon fibers.

Carbon Fiber 191

Carbon Fiber Renewable Carbon Eaton 191

Green Car Congress

MARCH 1, 2017

Lawrence Livermore National Laboratory (LLNL) researchers have become the first to 3D-print aerospace-grade carbon fiber composites, opening the door to greater control and optimization of the lightweight, yet stronger than steel material. Click to enlarge. —fluid analyst Yuliya Kanarska.

Carbon Fiber 150

Carbon Fiber Carbon Polymer Parts 150

Green Car Congress

DECEMBER 15, 2017

Researchers at the Department of Energy’s Pacific Northwest National Laboratory, along with experts from industry and academia, have developed predictive engineering tools for designing new, economical, and lightweight automotive composites. This approach should speed the development of more economical carbon fiber materials.

Carbon Fiber 150

Carbon Fiber Carbon Affordable Virginia 150

Green Car Congress

SEPTEMBER 7, 2020

Nissan reports developing a new process that speeds up the development of car parts made from carbon fiber reinforced plastics (CFRP). It can also lower a car’s center of gravity when applied to upper body parts, making it more agile and exciting to drive. Resin is then injected into the fiber and left to harden.

Carbon Fiber 291

Carbon Fiber Nissan Carbon Parts 291

Green Car Congress

NOVEMBER 6, 2014

the core company of the Teijin Group’s carbon fibers and composites business, has developed a new prepreg (carbon fiber sheet pre-impregnated with matrix resin) that offers super-high-heat and -oxidation resistance suited to automotive and aircraft engine compartments. Toho Tenax Co.,

Carbon Fiber 218

Carbon Fiber Engine Carbon Parts 218

Green Car Congress

APRIL 17, 2015

Ford and DowAksa signed a joint development agreement (JDA) formally to advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter. DowAksa is expanding on Aksa’s existing carbon fiber production assets.

Carbon Fiber 150

Carbon Fiber Carbon Ford Light 150

Green Car Congress

OCTOBER 13, 2016

PD Glasseiden, a Germany-based producer of fiberglass; European Carbon Fiber GmbH; and the ForschungsCampus Open Hybrid LabFactory e.V., In the first step at a location in Chemnitz, Saxony, CarboSax will build a pilot line for the sustainable production of carbon fibers.

Carbon Fiber 150

Carbon Fiber Germany Carbon Production 150

Green Car Congress

JULY 12, 2015

To source the new lightweight track-capable carbon fiber wheels that are standard on the new Shelby GT350R Mustang, Ford partnered with Australia-based Carbon Revolution. Carbon Revolution first began delivering composite wheels in 2004 for Formula SAE campaigns. Ford, however, wanted more of a mass-production solution.

Carbon Fiber 150

Carbon Fiber Carbon Shelby Ford 150

Green Car Congress

APRIL 24, 2017

Mitsubishi Rayon (MRC) (which is now consolidated into Mitsubishi Chemical , along with Mitsubishi Plastis and the former Mitsubishi Chemical) recently announced that its carbon fiber sheet molding compound (SMC) has been adopted for the rear hatch frame of the new Toyota Prius PHV. Fast speed is not as necessary for initial adoption.

Carbon Fiber 150

Carbon Fiber Mitsubishi Prius Carbon 150

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

MAY 22, 2015

Hexcel Corporation will invest $250 million in the construction of a carbon fiber plant in Roussilon, France. The new carbon fiber facility will occupy a 37-acre site at the Osiris Chemicals Industry Platform in Roussillon and will incorporate both polymerization and carbonization lines.

Carbon Fiber 150

Carbon Fiber France Carbon Supplies 150

Green Car Congress

MARCH 9, 2019

Williams Advanced Engineering has developed a pair of innovative technologies that promise a step-change in the affordability of composite materials. This has limited its application to vehicles that are low volume / high cost, or where the vehicle manufacturer subsidizes the process as part of their learning around new technologies.

Engine 265

Engine Carbon Fiber Affordable Manufacturer 265

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

MAY 14, 2023

Part-funded by the Advanced Propulsion Centre (APC), Ford’s consortium of six automotive technology leader and fleet operator partners will also help to determine the supporting hydrogen refuelling infrastructure required.

Hydrogen 434

Hydrogen Ford Fuel Carbon Fiber 434

Green Car Congress

JULY 1, 2020

BASF is launching an engineering plastic that is particularly suited for automotive parts that come into contact with hot oil. The injection-molding grade with a 10% carbon fiber reinforcement can be used within a wide temperature range between -30 and +180°C. The new grade is now globally available.

Oil 186

Oil Parts Engine Carbon Fiber 186

Green Car Congress

MARCH 26, 2014

Volvo Car Group and engineering company Flybrid Automotive, part of the Torotrak Group, have been conducting UK tests of lightweight Flybrid flywheel KERS (Kinetic Energy Recovery System) technology. The test car applies flywheel technology to the rear axle, while the combustion engine drives the front wheels. Click to enlarge.

Volvo 299

Volvo Carbon Fiber Fuel Vehicles 299

Green Car Congress

OCTOBER 25, 2014

Mercedes-Benz received two MATERIALICA Design and Technology Awards at the MATERIALICA 2014 trade fair for materials applications, surface technology and product engineering in Munich. The first was for the new steel pistons for diesel engines ( earlier post ), the second for high-strength carbon-fiber reinforced plastic (CFRP) struts.

Mercedes 262

Mercedes Carbon Fiber Diesel Cars 262

Green Car Congress

AUGUST 13, 2012

These projects include the development and validation of modeling tools to deliver higher performing carbon fiber composites and advanced steels, as well as research into new lightweight, high-strength alloys for energy-efficient vehicle and truck engines. Predictive Engineering Tools for Injection?Molded Description.

Carbon Fiber 231

Carbon Fiber Carbon Fuel Economy United States 231

Green Car Congress

SEPTEMBER 16, 2020

TFSI engine produces 96 kW (131 PS) and generates 200 N·m (147.5 The cylinder head, injection system, turbocharger and catalytic converter were modified accordingly for the CNG engine. They are made of fiber-composite materials and, in keeping with Audi’s lightweight construction philosophy, each weighs just 26 kilograms (57.3

Audi 504

Audi Gas Gas-Electric Gasoline-Electric 504

Green Car Congress

JANUARY 14, 2013

The all-new Corvette Stingray shares only two parts with the previous generation Corvette. engine, matching the 7.0L LS7 engine from the 2013 Corvette Z06 from 1,000 to 4,000 rpm. When open, these valves increase engine performance and produce a more powerful exhaust note. l/100km) of the current model. inches to 2.75

2014 257

2014 Carbon Fiber GM Fuel 257

Green Car Congress

OCTOBER 11, 2009

plan to jointly develop technology to boost the fuel efficiency of engines for small passenger jets by up to 30%. The companies then would use the technology to build an advanced engine in partnership with American and British firms. The effort will center around lightweight materials and a retooled engine design.

Carbon Fiber 186

Carbon Fiber Engine Mitsubishi Installation 186

Green Car Congress

OCTOBER 31, 2013

Royal DSM has joined the LIPA (“Lightweight Integrated Process Application”) project team, set up to develop an industrial process for the manufacture of endless-fiber-reinforced advanced thermoplastic composite parts. Glass fiber reinforced composites will be targeted at reducing the weight of semi-structural components.

Parts 199

Parts Production Carbon Fiber Carbon 199

Green Car Congress

JANUARY 21, 2012

Ohio businesses will receive technical and financial support for developing and demonstrating new technologies to produce high-tech component parts for Airbus. Airbus has already committed to a $1 million deal with NCC, the consortium manager, and can issue additional purchase orders over the five-year period of the agreement.

Ohio 231

Ohio Carbon Fiber Universal Carbon 231

Green Car Congress

MARCH 22, 2022

The main fan is a total of 8 meters in diameter with 12 hollow carbon fiber fixed-pitch blades and driven by a five-megawatt, 6700 horsepower electric motor. Absent engine and exhaust sounds, wind noise will be more noticeable inside the cabin of an electric vehicle. HALO Wind Tunnel Main Fan. Fan Specifications. Max Wind Speed.

Ohio 359

Ohio Wind Honda Carbon Fiber 359

Green Car Congress

JUNE 24, 2013

The XL1 is aggressively optimized for efficiency in all areas of its design and technology—from materials (carbon fiber reinforced polymer monocoque); to powertrain (0.8L Rear view, with engine compartment with air intake labeled. two-cylinder diesel, 20 kW electric motor and 5.5 Click to enlarge. Powertrain.

Plug-in 324

Plug-in Diesel Plug Hybrid 324

Teslarati

JANUARY 20, 2022

The world of Tesla aftermarket performance parts just welcomed its newest and possibly most impressive lineup yet. Thanks to a partnership with longtime Tesla tuner Unplugged Performance, Koenigsegg, the Swedish hypercar maker, is now producing a line of premium aftermarket parts for Tesla’s electric vehicles. .

Parts 139

Parts Carbon Fiber Tesla Carbon 139

Green Car Congress

OCTOBER 18, 2012

New to LF-LC and derived from project LFA, LF-LC leverages Lexus’ in-house experience in marrying carbon fiber and aluminium alloy materials to achieve a light body mass. The Advanced Lexus Hybrid Drive features an Atkinson cycle combustion engine mated to an advanced high-energy battery pack. Click to enlarge.

Lexus 218

Lexus Hybrid Concept Carbon Fiber 218