Building Mexico Oil-Sands 
Green Car Congress
JUNE 5, 2010
Preliminary work and engineering plans have been drawn up to build a 50,000 liter (13,209 gallon US) cultivation pilot plant at the Ketch Harbour facility. For dewatering the company has agreements in place with two technology providers and, through inVentures, has access to an organic sieve technology for removing water from the algae oil.
Green Car Congress
JUNE 14, 2010
In a pre-response to that speech, having successfully advocated for plug-in hybrids like the forthcoming Chevy Volt, we propose that the President follow that speech up with a “realistic and conservative” roadmap to halve our oil use in 10 years. Oil is holding us all hostage, economically and physically. Finally, it’s time to begin.
Green Car Congress
AUGUST 12, 2010
Geologic storage is currently focused on five types of formations:(1) depleted oil and gas reservoirs, (2) deep saline formations, (3) unmineable coal seams, (4) oil- and gas-rich organic shales, and (5) basalts. New Mexico Institute of Mining and Technology (Socorro, N.M.) The system will be tested at a CO 2 storage site.
Green Car Congress
JUNE 25, 2015
Variable-flow oil pump enhances efficiency. Piston-cooling oil jets contribute to optimal performance, efficiency and refinement. That helps ensure the oiling system maintains full pressure during extreme driving conditions. A die-cast aluminum oil pan contributes additional structural strength. turbo and Ecotec 1.5L
Green Car Congress
MARCH 17, 2012
An analysis of the US refining sector, based on linear programming (LP) modeling, finds that refining plausibly high volumes of Canadian oil sands crudes in US refineries in 2025 would lead to a modest increase in refinery CO 2 emissions (ranging between 5.4% to 9.3%) from a 2010 baseline, depending upon the supply scenario.
Green Car Congress
AUGUST 26, 2011
Comparison of the percent differential for WTW (well-to-wheel) GHGs from gasoline produced from WCSB oil sands using different production processes relative to gasoline produced from reference crudes. The proposed Project is not likely to impact the amount of crude oil produced from the oil sands. Click to enlarge.
Green Car Congress
APRIL 13, 2009
The cylinder head has integral cast oil passages that feed a set of internal oil control valves that activate cam phasers, enabling variable valve timing. The Ecotec LAF sand cast cylinder block is a superior refinement of the 2.4L Piston head and oil cooling jet. VVT (LE5) cylinder block which was first launched in 2006.
Expert insights. Personalized for you.
286 
Let's personalize your content