Green Car Congress

NOVEMBER 24, 2020

A large number of components in automobiles are made from plastics; these have to meet exacting safety, heat-resistance and quality requirements. That is why, so far, only petroleum-based materials have been suitable for manufacturing plastic components in automobiles that are subjected to particularly intensive wear.

Kits 410

Kits Audi Oil Automobile 410

Green Car Congress

NOVEMBER 19, 2020

The combustion engines with four, six, eight and 12 cylinders produced there will be manufactured at the company’s locations in Steyr in Austria and Hams Hall in the UK going forward. Plant Regensburg will also start manufacturing the new BMW X1 in 2022, which will be available both with an combustion engine and a fully-electric drive train.

BMW 396

BMW Engine Production South Africa 396

Green Car Congress

JANUARY 2, 2023

As part of the agreement, TML CV Mobility Solutions Ltd. Part of the US$128-billion Tata group, Tata Motors Limited, a US$37-billion organization, is a leading global automobile manufacturer of cars, utility vehicles, pick-ups, trucks and buses, offering extensive range of integrated, smart and e-mobility solutions.

Corporation 448

Corporation Transportation Motors Motoring 448

Green Car Congress

AUGUST 17, 2023

Rheinmetall has won a automobile industry order for structural parts worth a figure in the low three-digit million euro range. Cast in a complex process, the parts will be used in a fully electric vehicle made by a well-known premium automaker. The scope of supply encompasses hundreds of thousands of these fully processed parts.

Parts 284

Parts Supplies Automobile Industry Fully Electric 284

Green Car Congress

SEPTEMBER 24, 2019

Seeking to slash CO 2 emissions from its North American manufacturing operations, Honda has entered into long-term virtual power purchase agreements (VPPAs) for renewable wind and solar power that will cover more than 60% of the electricity that Honda uses in North America. will deliver to the grid by the end of 2020.

Purchase 299

Purchase Honda Renewable CO2 299

Green Car Congress

DECEMBER 6, 2014

Alcoa has developed new manufacturing technology—the Micromill—that will produce what the company says is the most advanced aluminum sheet on the market. Additionally, automotive parts made with Micromill material will be twice as formable and at least 30% lighter than parts made from high strength steel.

Manufacturer 268

Manufacturer San Antonio Production Future 268

Green Car Congress

JUNE 7, 2021

The platform, comprising hardware and software services, will be available to all automobile players in Thailand looking to accelerate their production and sales of EVs in Thailand and elsewhere in the ASEAN region. The new platform will entail an ecosystem combining technologies across the EV value chain, including auto parts manufacturing.

Thailand 334

Thailand Building Automobile Gas-Electric 334

The Truth About Cars

MARCH 4, 2025

BMW has launched a new website that catalogs every model it manufactured between 1928 and 2008. But its likewise been integrated into BMWs parts catalog. A few even have every available part the manufacturer still offers that will fit the vehicle in question. This is a very BMW thing to do.

2008 112

2008 BMW Production Automobile 112

Green Car Congress

JUNE 9, 2022

signed a strategic memorandum of understanding (MOU) with Automobile & PCB establishing strategic investment and cooperation between NEO and A&P to advance the Korean mass production facility of NEO’s silicon anode materials for electric vehicle (EV) lithium-ion batteries. NEO Battery Materials Ltd. NEO Battery Materials Ltd.

South Korea 434

South Korea Lithium Ion Battery Batteries 434

Green Car Congress

FEBRUARY 8, 2022

DS Automobiles, a Stellantis brand, has unveiled the E-TENSE PERFORMANCE prototype as a high-performance testbed for coming DS production designs. Since its launch in 2014, DS Automobiles has put electrification at the heart of its strategy. From 2024, every new DS Automobiles design will be only 100% electric.

Automobile 195

Automobile Future Production Cars 195

Green Car Congress

AUGUST 2, 2019

Leading motor manufacturer Nidec Corporation will form a joint venture with GAC Components Co., a member of China-based Guangzhou Automobile Group Co., to manufacture automotive traction motors. GAC Components mainly manufactures automobile interior parts, electric components, etc. Nidec in-wheel motor.

Automobile 170

Automobile Motors Motoring Motor 170

Green Car Congress

JANUARY 5, 2021

AUDI AG is the first automobile maker to be awarded the Chain of Custody certificate of the Aluminum Stewardship Initiative (ASI). The ASI also puts the spotlight on the people who are part of the aluminum supply chain. A dialog with labor union representatives also plays an important part. The importance of aluminum for Audi.

Audi 243

Audi Manufacturer Automobile Cars 243

Green Car Congress

MARCH 25, 2022

AVTOVAZ Group is part of the Dacia-LADA business unit with the Group Renault structure. AVTOVAZ manufactures cars for two brands: LADA and Renault. On 22 February—two days before Russia invaded Ukraine—the first serial LADA Vesta of the New Generation rolled off the assembly line of the LADA Izhevsk automobile plant.

Russia 432

Russia Ukraine Dealers Automobile 432

Green Car Congress

MAY 21, 2022

Hyundai Motor Group (HMG) entered into an agreement with the State of Georgia to build its first dedicated full electric vehicle and battery manufacturing facilities in the US. The new EV plant and battery manufacturing facilities represent an investment of approximately US$5.54

Georgia 435

Georgia Hyundai Building Motors 435

Green Car Congress

JANUARY 22, 2020

Daimler announced a trial and development partnership with Israeli cleantech company UBQ Materials to explore the use of UBQ’s climate-positive material in the production of automobile parts. Daimler is also promoting the use of UBQ across its logistics manufacturers to offset carbon footprint throughout the Daimler supply chain.

Climate 195

Climate Parts Companies Waste 195

Green Car Congress

JUNE 5, 2020

announced the development of a hydrogen fuel cell system for maritime applications based on fuel cell technology for automobiles, as part of efforts to offer environment-friendly powertrain solutions. As a part of this challenge, Yanmar has been working on development of future powertrains using hydrogen as fuel.

Hydrogen 365

Hydrogen Fuel Automobile Manufacturer Mariner 365

Green Car Congress

JULY 4, 2020

The next generation of smart electric vehicles will be produced by the joint venture smart Automobile Co., —Markus Schäfer, Member of the Board of Management of Daimler AG and Mercedes-Benz AG; responsible for Daimler Group Research and Mercedes-Benz Cars COO. This is a joint venture of Mercedes-Benz AG and the Zhejiang Geely Group.

Mercedes 307

Mercedes Global Parts Sale 307

Green Car Congress

AUGUST 2, 2021

million funding opportunity ( DOE-FOA-0002553 ) to support manufacturing innovations for high performance clean energy technologies to drive economy-wide reductions in carbon emissions, including: Topic area 1: Manufacturing Process Innovation. Topic Area 1c: Sustainable Chemistry Practices in Manufacturing.

Manufacturer 186

Manufacturer Li-ion Lithium Ion Battery 186

Green Car Congress

JUNE 1, 2023

liter Atkinson-cycle four-cylinder engine, which is part of the two-motor hybrid-electric system that powers Honda Accord and CR-V hybrid-electric models. As part of the new EV Hub, the Anna Engine Plant will produce the cases for the Intelligent Power Unit (IPU) that houses the EV battery module and its controlling hardware.

Honda 305

Honda Engine Ohio Acura 305

Green Car Congress

MARCH 16, 2022

As part of this, the 70 MPa resin high-pressure hydrogen tank developed for—and certified for—automobiles is now being requested for other applications in railways, shipping, and port cargo handling, as well as for FC generators.

Hydrogen 457

Hydrogen Toyota Transportation Automobile 457

Green Car Congress

APRIL 17, 2022

The newly developed CNF-reinforced plastic combines 20% CNF in a general purpose plastic (polypropylene) used in automobile interior and exterior components. The company will continue to lower costs in cooperation with CNF material manufacturers.

Parts 210

Parts Automobile Production Emissions 210

Green Car Congress

SEPTEMBER 6, 2023

Boasting a higher strength than metal, this CFRTP-UD tape can be applied to automobile frames and bodies, further enabling the recycling of end-of-vehicle-life parts into different, new automobile parts. The monomers obtained can then be used to manufacture new PA66.

Carbon Fiber 370

Carbon Fiber Economy Battery Batteries 370

Green Car Congress

MARCH 13, 2018

To ensure adequate battery capacity, partnerships with battery manufacturers for Europe and China have already been agreed. Modern diesel drives were part of the solution, not part of the problem, he stressed—also with regard to climate change. The contracts already awarded have a total volume of around €20 billion (US$24.7

Manufacturer 220

Manufacturer Battery Batteries Production 220

Green Car Congress

JUNE 18, 2019

Together with telecommunications company Telefónica Deutschland and network supplier Ericsson, Mercedes-Benz Cars is putting in place the world’s first 5G mobile network for automobile production in its “Factory 56” in Sindelfingen. Once installation and commissioning are completed, the network will be operated by Mercedes-Benz Cars.

Automobile 191

Automobile Mercedes Production Cars 191

Green Car Congress

MAY 10, 2018

Researchers at the University of Illinois have developed a new polymer-curing process that could reduce the cost, time and energy needed, compared with the current manufacturing process. The resulting polymer and composite parts possess similar mechanical properties to those cured conventionally. —Robertson et al.

Polymer 186

Polymer Manufacturer Energy Illinois 186

Green Car Congress

MARCH 25, 2021

The initial market strategy for Zeekr will be focused on the Chinese market as part of Geely but will also explore export opportunities to satisfy global market demand for premium electric vehicles. Zeekr will be jointly owned by Geely Automobile Holdings and Zhejiang Geely Holding Group (ZGH) under a 51% and 49% share structure.

Companies 435

Companies Auto Electric Cars Cars 435

Green Car Congress

MAY 9, 2017

China-based automobile manufacturer Guangzhou Automobile Group (GAC Group), the parent company of GAC Motor, has begun construction of a large industrial park for electric and intelligent vehicles as part of its efforts to boost its electric vehicle business. More than 45 billion yuan (US$6.5 Click to enlarge.

Industry 247

Industry Industrial Vehicles Automobile 247

Green Car Congress

JULY 17, 2021

Modern automobiles are built with more than 2,000 different compounds comprising 76 different elements. The team analyzed part-level data of material use for seven current year models, ranging from internal combustion engine vehicles (ICEV) to plug-in hybrid vehicles (PHEVs), all provided by Ford.

MIT 388

MIT PHEV Vehicles Insight 388

Teslarati

MAY 13, 2024

Tesla’s Gigafactory Texas Director of Manufacturing Engineering Renjie Zhu announced his departure in a LinkedIn post on Monday, after working with the company for five years in Texas and in China. He started at Giga Shanghai in March 2019 to build up the site’s body-in-white (BIW) manufacturing team.

Manufacturer 136

Manufacturer Tesla Texas North America 136

Green Car Congress

SEPTEMBER 9, 2022

Mullen Automotive, an emerging EV manufacturer, is acquiring a controlling interest in EV truck maker Bollinger Motors. Launched in 2015, Bollinger Motors is an American automobile designer and manufacturer of electric sport utility and medium-duty vehicle lines. The purchase price is $148.2

Motors 307

Motors Motoring Motor Commercial 307

Green Car Congress

JULY 1, 2020

The technology is used in the plating process for forming copper, nickel, and other metal coatings on substrates in the process of manufacturing electronic parts. and Kanematsu Corporation to manufacture and sell, and therefore expand the use of, new plating machines based on this new technology.

Toyota 269

Toyota Waste Corporation Manufacturer 269

Green Car Congress

SEPTEMBER 9, 2021

In case the relevant refueling infrastructure is set up and there is a demand for the new kind of eco-transport on the part of Moscow, we plan to provide for final assembly of hydrogen fuel cell buses at the Sokolniki Car Repair and Construction Plant in the capital of the country, where Kamaz electric buses are already assembled successfully.

Hydrogen 467

Hydrogen Russia Fuel Corporation 467

Green Car Congress

JULY 7, 2020

In addition, a new high-bay shelving unit and an automated small parts warehouse are planned. We are converting a major automobile plant during production. In other countries, electric cars will be manufactured at Mladá Boleslav, Chattanooga, Foshan and Anting. The two-color paintwork is one of the trademarks of the ID.

Conversion 389

Conversion Production All-Electric Germany 389

Green Car Congress

OCTOBER 28, 2021

The research project aims to generate new insights into the technological and physical hurdles of high-power wireless charging for automobiles. Other research projects at Volkswagen’s Innovation Hub Knoxville focus on advanced functional materials, including composite car body parts and plant-based materials for future interior designs.

Tennessee 418

Tennessee Universal Sustainable Transportation Porsche 418

Green Car Congress

SEPTEMBER 5, 2021

Conventional processes for manufacturing battery electrodes involve mostly toxic solvents and require a lot of space and energy. In the final step, the resulting coil is cut to the required size and the individual parts are stacked as appropriate in order to produce the finished battery cell. —Benjamin Schumm.

Battery 300

Battery Batteries Lithium Sulfur Lithium Ion 300

Green Car Congress

JULY 13, 2021

Electric Last Mile Solutions (ELMS), a designer of intelligent, e-mobility workstations for the last mile, signed a binding, long-term supply agreement with Liuzhou Wuling Automobile Industry Co.,

Miles 259

Miles Supplies Motors Motoring 259

Green Car Congress

NOVEMBER 7, 2019

The new R&D company, which will work on designing and developing BEVs (including platform) and its related parts, is anticipated to be established in China in 2020, with BYD and Toyota to evenly share 50% of the total capital needed. BYD Company Ltd. —Toyota executive vice president Shigeki Terashi.

BYD 283

BYD Toyota Electric Vehicles Companies 283