Remove Australia Remove Building Remove DIY Remove Wind
article thumbnail

A DIY Tracker Tough Enough for the Arctic

Cars That Think

So, I set about building an open-source ice tracker from DIY components that not only proved to be much, much cheaper but also much more capable than the commercial options. This is fast enough to identify wind waves, which typically have a frequency of about 0.2 Hz, and longer swells, which range from about 0.08

DIY 93
article thumbnail

A DIY E-bike Conversion on the Cheap

Cars That Think

At the time, e-bikes were still rather exotic, at least in the United States, so it seemed worth the expense and effort to build my own. Online discussions convinced me, however, that this is the expected behavior when commanding a motor to maintain a fixed amperage in its windings (thus applying constant torque) while under little load.

DIY 145
article thumbnail

A DIY E-bike Conversion on the Cheap

Cars That Think

At the time, e-bikes were still rather exotic, at least in the United States, so it seemed worth the expense and effort to build my own. Online discussions convinced me, however, that this is the expected behavior when commanding a motor to maintain a fixed amperage in its windings (thus applying constant torque) while under little load.

DIY 98