Green Car Congress

MAY 12, 2021

million) investment in 2018, SK now is the third-largest shareholder of the advanced battery company, following the CEO of Singapore sovereign wealth fund Temasek and founder Qichao Hu. Solid Energy and GM plan to establish a lithium metal battery test production plant near Boston by 2023, and are aiming for final commercialization in 2025.

Companies 186

Companies Battery Batteries Singapore 186

Green Car Congress

APRIL 26, 2018

Distinguished from the leakage and combustion of organic liquid electrolyte, solid-state electrolytes (SSEs) including sulfide, oxide, and polymer with relatively satisfactory safety have thus have caught people’s eyes as promising next-generation battery technology. Polymer electrolytes such as PEO may show low conductivity near 10 ?6

Li-ion 207

Li-ion Polymer Lithium Ion Cheap 207

Green Car Congress

JUNE 8, 2016

OXIS and Lithium Balance are on track to have their battery systems in China by the spring of 2018. OXIS Energy has been involved in the design, development and now the move towards commercial production of Polymer Lithium Sulfur cells for electric vehicle battery systems since 2004.

Lithium Sulfur 150

Lithium Sulfur 2018 Lead Acid Li-ion 150

Green Car Congress

SEPTEMBER 13, 2019

At the IAA in Frankfurt this year, Germany-based ElringKlinger AG is presenting a polymer electrolyte membrane fuel cell (PEMFC) stack with exceptional performance characteristics as well as solutions centered around electric drivetrains as well as systems and components from the field of battery technology. NM12 fuel cell stack.

Fuel 255

Fuel Hydrogen Polymer 2018 255

Green Car Congress

JANUARY 22, 2018

Although platinum (Pt) has been long known as the most efficient ORR catalyst, its high cost and scarcity have hampered the large-scale commercialization of fuel cell and metal–air battery technologies. Kisailus (2018) “Electrocatalytic N-Doped Graphitic Nanofiber - Metal/Metal Oxide Nanoparticle Composites” Small doi: 10.1002/smll.201703459.

Carbon Fiber 244

Carbon Fiber Fuel Polymer Carbon 244

Green Car Congress

NOVEMBER 10, 2018

Hence, it is necessary to address these issues prior to its large-scale commercialization. … As we know, alumina has been applied as filler in polymer electrolytes to increase overall conductivity and decrease the crystallization like silica filler. —Lei et al. doi: 10.1039/C8CC07741J.

Lithium Sulfur 259

Lithium Sulfur Li-ion Battery Batteries 259

Green Car Congress

MAY 13, 2014

If successful, the first commercialization of this technology is expected as early as 2018. In 2012, INVISTA and LanzaTech signed a joint development agreement focused on bio-based butadiene, with initial commercialization expected in 2016.

Gas 199

Gas Polymer Waste Commercial 199

Green Car Congress

JUNE 19, 2019

The study has revealed that fiber-reinforced polymer components with structural foam ribbing and reinforcements can save more than 40 kg of weight per car vs. conventional all-metal designs. With the optimized structural hybrid design, the buckling (displacement) of the door panel under load was effectively minimized.

International 191

International Parts Hybrid Polymer 191

Green Car Congress

JUNE 22, 2017

The order, which will run through 2024, is ElectriPlast’s first European automotive commercial order. If awarded, this optical electronics application for that program will be utilized in approximately 2 million vehicles beginning with the 2018 model year.

Electric Cars 150

Electric Cars Polymer Electric Electrical 150

Green Car Congress

MAY 19, 2018

AvCarb Material Solutions, LLC: Development of Innovative Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells. This program utilizes novel manufacturing techniques combined with state of the art material analysis to produce low-cost, high-performance materials to enable commercialization. Gas Diffusion Layers. Giner, Inc.:

Hydrogen 199

Hydrogen Fuel Low Cost Polymer 199

Green Car Congress

MARCH 21, 2018

Researchers at Shanghai Jiao Tong University (SJTU) have developed a polymer binder—PAA-P(HEA-co-DMA)—for use with silicon microparticle (SiMP) anodes. Nonetheless, several technical challenges still limit its commercialization. Si microparticle (SiMP) powder is inexpensive and commercially available. 2018.02.012.

Deep Cycle 150

Deep Cycle Polymer Li-ion Water 150

Green Car Congress

NOVEMBER 16, 2018

The US Department of Energy announced $98 million in funding for 40 new projects as part of OPEN 2018, the Advanced Research Projects Agency-Energy’s (ARPA-E) latest open funding opportunity. Novel Polymer-enhanced Rechargeable Aluminum-Alkaline Battery Technology – $2,000,000. Ionic Materials, Inc.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

APRIL 6, 2018

We combined theory, a powerful new tool for synthesizing nanoparticles and more than one metallic element—in this case, an alloy consisting of platinum, copper and gold—to create a catalyst that is seven times more active than state-of-the-art commercial platinum. —Professor Chad A. Mirkin, co-corresponding author.

Design 191

Design Chad Polymer Conversion 191

Green Car Congress

APRIL 25, 2013

Currently operating for more than a year at pilot scale, Rennovia has targeted demonstration-scale production of bio-based adipic acid in 2014, and anticipates first commercial-scale production in 2018. Bio-polymers Materials'

Renewable 286

Renewable Production Polymer Global 286

Green Car Congress

JULY 21, 2015

Isobutene is a key chemical building block that can be converted into transportation fuels, polymers and various commodity chemicals. The objective is to build and operate the first full-scale bio-isobutene commercial plant to convert sugar beets into 50,000 tonnes bio-isobutene by 2018. Earlier post.).

Global 150

Global South America Polymer Convert 150

Green Car Congress

OCTOBER 27, 2019

Daimler Trucks & Buses, one of the world’s largest commercial vehicle manufacturers, aims to offer only new vehicles that are CO 2 -neutral in driving operation (“tank-to-wheel”) in the triad markets of Europe, Japan and NAFTA by 2039. The first hand-off to a customer was in 2018.

Japan 186

Japan Fleet Europe Switzerland 186

Green Car Congress

SEPTEMBER 28, 2017

Others are ground vehicle/heavy equipment, energy, and industrial and commercial machinery. The AMSC is planning to issue by June 2018 an update to its roadmap. ANSI is inviting those in the automotive industry who may have an interest in articulating standardization needs from the sector’s perspective to join the collective effort.

Standards 150

Standards America Polymer Manufacturer 150

Green Car Congress

NOVEMBER 20, 2019

In May 2018, Bridgestone Corporation announced the development of the world’s first polymer to bond rubber and resins at the molecular level. The new polymer features unprecedented durability with crack resistance that is more than five times higher, abrasion resistance that is more than 2.5

Polymer 236

Polymer Commercial 2018 Corporation 236

Green Car Congress

AUGUST 18, 2019

They have patented and scaled-up the process in lab demonstrations and are working with ORNL’s licensee Momentum Technologies to scale the process further to produce commercial batches of rare earth oxides. No commercialized process currently recycles pure rare earth elements from electronic-waste magnets. —Ramesh Bhave.

Energy 220

Energy Waste Idaho Lithium Ion 220

Green Car Congress

MAY 10, 2018

These main challenges plague the practical utilization of sulfur cathode in commercial battery market. However, each process to optimize the carbon scaffold with functional polymers and carve functional groups on the surface of carbon is too complicated and requires expensive and elaborate techniques. Kim, Harif D. 8b03959.

Lithium Sulfur 186

Lithium Sulfur Battery Batteries Engine 186

Green Car Congress

MAY 1, 2018

Currently, liquid electrolyte still [dominates] the commercial LIB market since they are low cost, easy to prepare and [feature] high ionic conductivity. Al 2 O 3 is a commonly used filler in polymer electrolytes, with electrochemical stability and relatively high ionic conductivity. Nail-penetration tests showed that LiNi 0.6

Li-ion 199

Li-ion Hybrid Battery Batteries 199

Green Car Congress

DECEMBER 20, 2018

However, this lung-inspired design still has some room for improvement before it will be ready for commercial use. Since the nano-polyethylene membrane is a polymer-based film, it cannot tolerate temperatures higher than 100 degrees Celsius, which could limit its applications. 2018.11.015.

Gas 268

Gas Water Hydrogen Polymer 268

Green Car Congress

MAY 21, 2015

Isobutene is a key chemical building block that can be converted into transportation fuels, polymers and various commodity chemicals. IBN-One is a societe anonyme (limited liability corporation) with share capital of €1,000,000, jointly owned by Cristal Union and Global Bioenergies; the plant could be operational by 2018.

Renewable 150

Renewable Global France Grant 150

Green Car Congress

DECEMBER 31, 2016

Additionally, many chemicals relied upon for transportation (such as oils and lubricants) as well as other commodity chemicals and polymer precursors are, and will likely remain, carbon-based. By 2018, complete gap analyses to identify the barriers and solutions to potentially reaching a mature modeled price of $2/gge for biofuels.

Transportation 207

Transportation Fuel Conversion Water 207

Cars That Think

OCTOBER 17, 2022

It is also intended to show off the sensor, which is the same type used for commercial electronic noses, or. Costanzo says he’s wary of hype and doesn’t want to give people the impression that a commercial device will be available any day now. But he does want to offer hope. more than 700,000 devices implanted in ears around the world.

Massachusetts 145

Massachusetts Commercial Universal Indiana 145

Green Car Congress

JANUARY 13, 2016

Every tank is made up of several layers: the inner tank made with gas-tight polyamide is wrapped in carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP). When the latter moves into production in 2018, it will use the second-generation of the technology, shown at CES 2016. mi)—i.e., about 6 kg.

Audi 150

Audi Concept Detroit Fuel 150

Green Car Congress

FEBRUARY 23, 2018

In a paper in the journal Materials Today , the team reports that reinforcing a solid polymer electrolyte with the ceramic textile achieved high lithium ion conductivity and stable long-term Li cycling over 500 hours without failure. The technology will have a wide-range of applications in commercial electronics. Wachsman, E.

Li-ion 247

Li-ion Lithium Ion Battery Batteries 247

Green Car Congress

FEBRUARY 15, 2022

The CMU team seeks to develop novel ionomer-free electrodes to enable transformative improvements in polymer electrolyte membrane (PEM) fuel cell technology. Pratt & Whitney will design a novel, high-efficiency hydrogen-power turbomachine for commercial aviation. Since its founding in 2009, ARPA-E has provided $2.93

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

JANUARY 9, 2018

Kia Motors presented its new “Boundless for All” future mobility vision at the 2018 Consumer Electronics Show (CES) in Las Vegas. Alongside these technologies, Kia announced its plans to roll-out its WiBLE car-sharing service—launched in Korea in 2017—to new regions from 2018, starting with Europe. Niro EV Concept.

Kia 150

Kia Concept Hybrid Las Vegas 150

Cars That Think

OCTOBER 20, 2023

ANYbotics ] Since their mass production in the early 2000s, vacuum robots have emerged as highly successful commercial products in the field of home automation. First introduced as a concept at CES 2018, the Honda AWV is now advancing toward commercialization. Paper ] via [ KIMLAB ] Happy 100 Ikeadroneversary to Verity!

Honda 101

Honda Boston Switzerland Austin 101

Green Car Congress

MARCH 10, 2018

The paper is a characterization study of commercial prototype carbon nanotube (CNT) membranes consisting of sub–1.27-nm-diameter A) SEM image of the CNT membrane surface, showing CNT tips emerging from the polymer. It consists of a carbon nanotube fixed within a flexible polymer sheet and aligned so that both of its ends are open.

Carbon 199

Carbon Fuel Polymer Austin 199

Green Car Congress

MAY 20, 2021

Ltd (EVE) to support the commercialization of StoreDot’s silicon-dominant anode XFC FlashBattery for EVs. The new deal builds on the existing framework agreement signed by StoreDot and EVE Energy in 2018 to collaborate on a small form factor of StoreDot’s XFC technology.

Manufacturer 170

Manufacturer Energy Battery Batteries 170

Green Car Congress

AUGUST 30, 2016

Carbon fiber currently is produced by converting a carbon-containing polymer precursor fiber to pure carbon fiber through a carefully controlled series of heating and stretching steps. ORNL researchers succeeded in developing a viable high-volume process using commercially-available low-cost textile-grade acrylic fiber precursor materials.

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

OCTOBER 29, 2018

Scientists at Stanford University have developed electrochemical cells that convert carbon monoxide (CO) derived from CO 2 into commercially viable compounds more effectively and efficiently than existing technologies. —senior author Matthew Kanan, an associate professor of chemistry at Stanford University. Ripatti et al.

Conversion 223

Conversion CO2 Convert Sodium 223

Green Car Congress

MAY 4, 2018

The high costs associated with these processes are one of several issues that plague the commercial viability of biofuels and bioproducts. Performance advantaged biobased products are bioproducts that do not resemble an existing commercial petroleum?derived Though this represents a large supply of potential feedstock and commercial?scale

Waste 170

Waste Renewable Conversion Carbon 170

Green Car Congress

FEBRUARY 26, 2018

Hence, this perspective manuscript contributes to paving the way to mass commercialization of ASSBs by investigating the multiple challenges from the perspective of production engineering and developing possible production scenarios for the fabrication of ASSBs. —Schnell et al. 2018.02.062.

Li-ion 199

Li-ion Lithium Ion Production Battery 199

Green Car Congress

MARCH 6, 2018

Techrules, a China-based automotive R&D company ( earlier post ) is unveiling the final production design of its Ren RS series-hybrid supercar at the 2018 Geneva Motor Show. The companies will jointly develop logistics vehicles powered by the TREV system, to provide a capable and cost-effective light commercial vehicle.

Design 199

Design Range Hybrid Production 199