Remove 2000 Remove Downsizing Remove Exhaust
article thumbnail

Achates OPGCI project targeting 50% fuel efficiency gains over downsized GDI engine at reduced cost

Green Car Congress

The engine should yield fuel efficiency gains of more than 50% compared to a downsized, turbo-charged gasoline direct injection engine, while reducing the overall cost of the powertrain system, said Fabien Redon, Vice President, Technology Development at Achates Power. bar was measured at 2000 rpm, with 17.4 Earlier post.)

article thumbnail

Fiat introducing new 2-cylinder 0.9L Turbo TwinAir in 2014 MiTo mini

Green Car Congress

The gasoline engine delivers 105 hp (72 kW) at 5500 rpm and maximum torque of 145 N·m (107 lb-ft) at 2000 rpm/min, with combined cycle fuel consumption of 4.2 Turbocharged by means of exhaust gas turbocharger with engine load management by means of variable intake valve activation. Fiat is introducing a new two-cylinder 0.9

2014 299
article thumbnail

BorgWarner R2S two-stage turbo boosts performance of new top-end Ford 2.0L diesel

Green Car Congress

The high-performance engine, being offered in Mondeo, S-MAX and Galaxy models in Europe, achieves an output of 155 kW (210 PS) and a maximum torque of 450 N·m from 2000 rpm and will replace the 2.2-liter The new high-powered TDCi diesel engine follows the downsizing trend we’ve led with our EcoBoost petrol technology.

Diesel 150
article thumbnail

Ricardo’s “deep” Miller cycle concept: Magma

Green Car Congress

In its new report on downsized and boosted gasoline engine technologies ( earlier post ) the ICCT highlighted Ricardo’s work on an “extreme” Miller cycle concept with high (13:1) compression ratio (CR) and central direct injection in a downsized boosted engine. A long exhaust stroke then extracts maximum efficiency. Resources.

Concept 150
article thumbnail

Promising Delphi 1st-gen Gasoline Direct Injection Compression Ignition engine meeting ultra fuel efficient program targets

Green Car Congress

Due to the lower exhaust enthalpy of lower temperature engines using PPCI, it is difficult to produce intake boost with acceptable boost system parasitis. A practical powertrain system with robust PPCI combustion is needed, including injection, valvetrain, boost, and exhaust subsystems. —Sellnau et al. kWh and FSN 0.1,

Gasoline 304
article thumbnail

Ford moving to vehicle testing with advanced 2.3L MiGTDI engine research project; Tier 3 SULEV30 target with 25% fuel economy improvement

Green Car Congress

Ford’s approach to the project was to engineer a comprehensive suite of gasoline engine systems technologies, including: Aggressive engine downsizing in a mid-sized sedan from a large V-6 to a small I-4. 20 bar BMEP @ 2000 - 4500 rpm. Split, parallel, cross-flow cooling with integrated exhaust manifold. Earlier post.).

article thumbnail

Downsized 5.5L V8 Biturbo in S 63 AMG Delivers 25% Fuel Savings Compared to Predecessor; Stop-Start is Standard

Green Car Congress

For the first time, AMG is also utilizing the advantages of gasoline direct injection with spray-guided combustion and piezo-electric injectors: thanks to its higher thermodynamic efficiency, this technology makes more efficient use of fuel and leads to lower exhaust emissions.